Department Activities
The Mechanical Department grand Inauguration of MESA 7.0 along with the Placement Readiness Program, an intensive and comprehensive workshop designed to equip students with the skills and knowledge needed to excel in the job market. This event will be graced by esteemed guests including Dr. P. Malathi, Principal of DYPCOE, Akurdi, Mrs. Jasmita Kaur Deen of Training and Placement, and Mr. Lalit Kumar Training and Placement Officer of DYPCOE, Akurdi on 18 October 2023
Dr. Sachin Jambhale organized an expert session on “Introduction to Micromachining” by expert speaker Dr. Narendra Bhople, Associate Professor, DYPIT, Pimpari, Pune, for fourth-year students on November 4, 2023. Around 55 students attended a guest lecture for the elective subject Data Analytics Laboratory.
Mechanical Department organized One week Short Term Training Program (STTP) ON “ Ancient India Knowledge for Motivation and Spiritual Health is held between 26 December - 30 December, 2023 ” Total two hundred thirty six participant are participated in this program.
The Department of Mechanical Engineering has done an MOU with Mechatol Product Engineering Solutions Pvt Ltd., Pune (MPES). As a part of the MOU, Mechatol is going to set up the Project Based Learning Lab worth 3.5 Lakhs in the Mechanical Department on 17 August 2023.
A guest lecture on “Higher Study” for BE Mech. students , by Dr. by Dr Anurag Singh
“SE ORIENTATION 2023”
A MOU with “Imperial Institute of Excellence”
An industrial visit organized for SE Mechanical students at”PMPML Central Workshop Swargate” on 16-17 May 2023
V-LAB Conducted By Faculty
Guest lecture for TE Mechanical students on topic “ CAE Application” by Prof. Kavidas Mate on 16 May 2023
Mechanical Department arranged felicitation’s ceremony of “Team Predators Racing” for achieving great success in BAJA SAEINDIA 2023 championship on 25 April 2023.
Department of Mechanical in Association with American Society of Material (ASM) International Pune Chapter Organizes One Week Faculty Development Program (FDP) On “Recent Trend In Advanced Manufacturing Technology” Is held between 24th to 28thApril, 2023.
The Mechanical department conducted a Parent’s Teacher Meet for Mechanical Engineering students on 29 December 2023.
V-LAB Conducted By Faculty
Earn and Learn Scheme :2022
Lab Development Through: Earn and Learn Scheme Lab Documentation Through Earn and Learn Scheme Students Attendance
Industrial Visit to Katraj Milk Dairy, Pune. During the visit of SE & BE mechanical students have interacted with industry experts.
Date: 10th November 2022
Industrial Visit Data
Virtual Lab
Name of Subject: Solid Modelling and Drafting
Title of Experiment: Translation transformation of a 2-D object.
No. of students appeared : 44
Usage: 47
Name of Subject Teacher: Vaibhav V Phule
Orientation Program
Department of Mechanical Engineering had organised Orientation session for all SE, TE & BE students on 22nd January 2019. Motivational speech by all the speakers, inspired all the students and all sessions were eye openers. Certificate distribution for students earning good grades in value added were also distributed. Sessions were conducted by following respected members of our college.
1. Principal sir. Dr. Vijay wadhai
2. Dean placements Mrs.Jasmita Kaur
3. HOD Mechanical Dr. R.S.Hingole
4. Dean Academic Dr. S.M.Shiyekar
5. T & P Mechanical Department Mr. Swapnil Ghogardare
One Day Workshop
Website Designing & Student Enrollment for course in GNOMIO on 12th Jan 2019
The objective of the workshop was to guide faculties on how to design website and enroll students for the course in GNOMIO. Mr. Arun Kumar Battu, the faculty of Mechanical Department coordinated this activity on 12th January 2019.
Social Activity
Faculty participating in Social Activity– Meditation For All on 28th Dec 2018
For Betterment and Stress Management of Faculty Members of Mechanical Engineering Department session was arranged in CADCAM Lab of department of Mechanical Engineering. Dr.R.S. Hingole HOD Mechanical guided on the Meditation in detailed manner.
FDP
Mechanical Department organized one week Faculty Development Program on “Outcome Based Education—An Effective Teaching-Learning Practice and Assessment” from 11th June 2018 to 16th June 2018.
Dr. R. S. Hingole felicitating Dr. B. S. Balapgol
Dr. B. S. Balapgol (Principal, DYPCOE, Akurdi, Pune), Dr. Mrs. P. Malathi (Vice-Principal, DYPCOE, Akurdi, Pune), Dr. R. S. Hingole (Head of Mechanical Dept, DYPCOE, Akurdi, Pune), Dr. V. A. Kulkarni (Head of Production Dept, DYPCOE, Akurdi, Pune), Dr. Preeti Patil (Head of IT Dept, DYPCOE, Akurdi, Pune), Mr. K. P. Wani (Manager, ARAI, Chakan, Pune) were speakers during the workshop. Total 154 faculties were successfully attended and benefited through this workshop.
Industrial Visits
Industrial visit to “PMPML Workshop, Swargate, Pune”, was organized on 6th and 7th April 2018 for SE students. Total 117 students visited the plant. Prof. Swapnil V. Ghogardare, Prof. Rachit Roshan, Prof. Deepak Sharma accompanied the students.
Industrial visit to “PMPML Workshop, Swargate, Pune”, Pune
Poster Presentation & Quiz competition
DYPCOE student chapter of Quality Circle forum of India has organized campus level poster presentation and Quiz competition on 23 rd February 2018.
Dr. R. S. Hingole (Head Mechanical Engineering Department) felicitating chief guest Mr. Sudhir Inamdar
Mr. Sudhir Inamdar was chief guest for the event. He judged these two events and also guided the participants. He talked on importance of quality, role of quality engineer, different quality tools and problem solving techniques. The session was made interactive by thought provoking ideas discussed by him to the student. The session was very helpful to students regarding metrology and quality control and manufacturing process subject. Total 26 groups participated in these competitions. Students were very enthusiastic during competitions and very interactive during the session. First two winners are declared from these competitions and given prizes for the same.
An industrial visit was arranged for BE Mechanical students for subject ‘Dynamics of Machinery at ‘MY CAR (PUNE) PVT.LTD Service Centre Workshop, Bhumakr Chowk, Pune.
Photo 01: Training Centre Glimpses of Student
Photo 02: Mr. Deepak Mahajan and Mr. R. Lahane Delivering why there is Need of Balancing?
Guest lecture on Emotional Intelligence was arranged to give an idea about how to tackle with emotional quotient.
Photo 1. Prof. S. R. Deodas while felicitating Mr. Kishan Watni
Photo 2. Faculty members and Students while attending the session
ALUMNI MEET DURING BAJA SAE CALIFORNIA COMPETITION 2017
In BAJA SAE International Event, the college has invited the alumni, who are staying in and around California, so that the visiting team would get in contact with them and also the alumni would have an idea what the students at their alma mater are doing. So, some of the alumni visited the competition site. Alumni were really impressed with the college activities and also given the best wishes to the visiting team for competition and their future endeavors. Mr. Parvinder Thapar (alumni, batch 1996) from San Fransisco. And Mr. Rupesh Jain (alumni, batch 1996) from Las Vegas came to cheer up the team members for the competition.
Some Glimpses of Alumni Meet in BAJA SAE International competition held at California, USA.
A Guest Lecture by Mr. Suraj Thorat, alumni of Mechanical Engg. Dept, recently cleared UPSC exam 2017 on “How to Prepare for UPSC Exam” was delivered on July 05th 2017 for all the students of D.Y.Patil College of Engg. Akurdi, Pune.
Figure 1: Dr. B.S. Balapgol (Principal) felicitating Mr. Suraj Thorat along with Dr. P. Malathi (Vice Principal) and Prof. S. Ghogardare (dept T &P Coordinator)
Figure 2: Mr. Suraj Thorat sharing his experience with student audience.
National Defense Academy, Khadakwasla Cadets visited College BAJA team "Team Predators".
National Defense Academy, Khadakwasla Cadets visited D Y Patil College of Engineering Akurdi Pune at Dr. D. Y. Patil Educational Complex Akurdi Pune. During the visit they have interacted with the BAJA team "Team Predators" and Robotics Team.
Hon. Col. S. K. Joshi, Director of Dr. D. Y. Patil Educational Complex, Akurdi while addressing to Cadets and encouraged them to serve nation in the field of engineering and technology.
Dr. B. S. Balapgol Principal, Dr. Mrs. P. Malathi Vice Principal and Dr. D R Panchagade Head, Mechanical Department were present during the session. Students of BAJA Team Captain Shubham Sutar and Vice Captain Aditya Gawale presented the design, aesthetics and ergonomics considerations of BAJA All Terran Vehicle.
"Team Predators" of mechanical engineering department stood at 3rd position in Acceleration and overall 5th position in Enduro Student India Competition held at Coimbatore
Team members during collection of award
Some Glimpses during the competition of ESI competition at Coimbatore
‘Team Illuminati’ of D Y Patil College of Engineering Akurdi, Pune have organized Astro-Exhibition in association with JVP and AUCAA on 23rd Sept,2016.
Team Illuminati after inauguration of event with Dr. B. S. Balapgol, Vice Principal: Dr. P. Malathi and Head of Mechanical Engineering Department: Dr,. D. R. Panchagade
Student volunteers explaining about the asteroids in exhibitions
SAE SUPRA “Team Metal Falcons” have organised three days workshop on vehicle design from 29-9-2016 to 30-9-2016.
SAE SUPRA “Team Metal Falcons” have organised three days workshop on vehicle design from 29-9-2016 to 31-9-2016. Around 170 participants came for the workshop from different states.
Day 1: Inauguration by Principal Dr. B. S. Balapgol, Vice Principal: Dr. P. Malathi and Head of Mechanical Engineering Department: Dr,. D. R. Panchagade
Day 2: Team interaction and design concept
Day 3: Car Design and BIW design
Guest lecture by Mr. Jameer Manur, on ‘Applications of Engineering in Astronomy’
Guest Lecture by Mr. Jameer Manur, Research Associate, Radio Physics lab, INTER UNIVERSITY CENTRE FOR ASTRONOMY AND ASTROPHYSICS on "Applications of Engineering in Astronomy" was deliverd on August 26. 2016 for students of all branches of college.
Guest lecture by Dr. S.T. Vagge, on ‘Corrosion and Its Prevention’
A Guest Lecture by Dr. S.T. Vagge, Professor, Material Science and Metallurgy, COEP on “Corrosion and Its Prevention” was delivered on August 10th, 2016 for the students of SE (Mechanical).
Industrial visit for SE mechanical Engineering students is organised at saakshi Machine and Tools Pvt. Ltd. Bhosari
Location of industry: Plot No. EL-23, ‘J’ Block, MIDC, Bhosari Pune – 411 026, Maharashtra(India)
Date of Visit: 27/06/2016 at 3.30 p.m.
Industrial visit for BE mechanical Engineering students is organised at Deccan Honda Workshop Pimpri Pune
Location of industry: DeDECCAN HONDA
C/O BAFNA AUTO CARS I PVT LTD
NEAR FINOLEX CABLE COMPANY
OLD PUNE MUMBAI HIGHWAY
PIMPRI PUNE 411018
Date of visit: 10 August 2016.
Guest lecture by Dr. Vishal Sardeshpande on “Energy Efficiency in Thermal Utilities”
A guest lecture was organized on 28th July 2016 for the students of BE mechanical of Dr. Vishal Sardeshpande, Associate Professor at CTARA, IIT Bombay.
Students of Astronomy Club organized an event ‘Mobile Planetarium shows’ in Tantrostav 2016
Students of Astronomy Club organized an event ‘Mobile Planetarium shows’ in Tantrostav 2016. Mobile Planetarium was borrowed from IUCAA, Pune and shows were conducted on 10th and 11th February 2016.
Team of ‘Students’ Astronomy club: Illuminati
Visitors to Mobile Planetarium at Tantrostav: Faculty members and citizens
Mechanical department Astronomy club students organised 'Hubble and Beyond' exhibition
Student Volunteer explaining'Hubble Space Telescope' Model to Principal
Student Volunteer explaining 'Hubble Space Telescope' and 'James web Telescope' Model to Vice Principal and Head of the departments and Dean
[From Left: Model of 'Thirty Meter Telescope' , Model of 'Hubble Space Telescope', Model of Astrostat' satellite and Model of 'James web Telescope'
Students of TE mechanical visited "Indo German Toll Room, Aurangabad" on 22 and 23 Spet 2015
Department of Mechanical Engineering initiated Value added courses to all students studying in Mechanical Engineering department to make students techno savvy and well prepared for campus
CATIA
ANSYS
Industrial visit of BE mechanical students at Central Air Conditioning umit of a City Mall
For subject Refrigeration and Air Conditioning the visit is carried out and nearly 180 students were present for visit.
Central Refrigeration System
TWO DAYS WORKSHOP ON COMPUTER AIDED MANUFACTURING FROM 10/9/15 TO 11/9/15 INCLUDES THEORY SESSIONS AND PRACTICAL SESSIONS
Company staff Mr. Nitin Ratnaparkhe (Onwards Technologies, Asst. Manager) and Mr. Wani (Onwards Technologies, Asst. Manager) have interacted with the students and for total no of students present for the sessions are 180
INDUSTRIAL VISIT AT SEACO INDIA PVT. LTD. TALEGAON, PUNE.
As per the curriculum of BE Mechanical students, for the subject Advanced Manufacturing Processes (Elective II) we had conducted Industrial Visit at SEACO India Pvt. Ltd. Talegaon, Pune on 15/07/15 at 10.00 AM to 03.00 PM.
ONE DAY BAJA ATV (ALL TERRAIN VEHICLE) WORKSHOP
Date-21/08/2015
Guest lecture by Dr. R. K. Goyal, Asso. Prof. Material Science And Metallurgy, Mechanical engineering department, COEP Pune, on ‘Nanotechnology’ for SE students
Date: 08/07/2015
A Expert Lecture by Dr. R. B. Ingle, Prof & Head, Mechanical Engineering Dept., Cummins College of Engineering for Women, Pune, on “Dynamics of machinery”
Date-06/08/2015
A guest lecture by Mr. D.K. Pathak, Deployment Champion and General Manager of business Excellence in SKF Pune on “Operation Excellence and its Attributes towards sustainable growth” for the student of BE & TE (Mechanical)
Date-23/08/2015
EATON hydraulics group, Pimpri delivered an awareness session at Dnyanprasad Auditorium for T.E. and B.E. Mechanical Students
Date: 26/06/2015
The representatives from the EATON HYDRAULICS ARE Mr. Soumi Das (Head, Marketing, EATON), Neha Rawte (HR Manager, EATON), Priyanka Jain (HR Manager, EATON) and Mr. Vikram Jadhav (Director, IFS Academy)
COIN EXHIBITION
Pre placement talk:
ELECTROMECH PVT LTD.
INDIAN ARMY
DASSULT INTERNATIONAL organized CATIA Expert Competition for all Engineering students along with 3DPLM Software Ltd Pune in India.
Date of first selection test :- 06/01/2015
Faculties of 3DPLM briefing students about competition on 06 Jan 2015
Felicitation of all selected students by Mr. Michel RECAN Senior director Global Learning Solutions Dassault Systems International on 19 March 2015
Third Year students are trained by expert trainers of SEED InfoTech Pvt. Ltd. Pune.
Department of Mechanical Engineering initiated Value added courses to all students studying in Mechanical Engineering department to make students technically strong and well prepared for campus. MOU has been made with IFSA Academy Pune for all these trainings.
Certificate Distribution for trained students by Prof. P. T. Nitnaware
Visit to Kirloskar Pneumatics Ltd
HR Officer explaining the students about Company
Internal Combustion Engine Dis-assembly Workshop
Visit to “Aditya Engineers co., Pune
Monday, September 22nd, 2014
After concrete effort of our management, the students of D. Y. Patil College of Engineering from Mechanical Department got this esteemed opportunity to have an industrial visit to small scale industry “Aditya Engg. co., at post Khalad, Saswad- Jejuri Road, Pune-44". We appreciate the effort of the management of DYPCOE-Akurdi & Quality department of SAE both for executing this successful Industrial visit.
Blood Donation Camp Organized by Department of Mechanical Engineering & MESA
Monday, September 15th, 2014
We are very much thankful to the Management of D Y Patil Pratishthan, Campus Director, Col. S K Joshi, Principal Dr. D. G. Khairnar, and Registrar Mr. D. A. Bhagwat for giving opportunity to conduct this camp. We are also thankful to the MESA volunteers for this camp and the blood donors.
Parent Teacher Meet
Dr. D. R Panchagade (Head, Mechanical Engg Dept) discussing with parents...
Industrial visit to Bio-Gas Power Plant of Final year Mechanical Engineering students
Friday, January 31st, 2014
The details of the visit are as below:
Day & Date: Friday, 31st Jan 2014
Location: Model colony, Pune
Executed & Maintained by: M/S. Enprotech solutions, Pune.
Project name: 5 Tons per day Biomethanation Ceneration Plant to treat segregated organic municipal waste.
No of students presented: 60(Div A), 78 (Div B).
Teachers accompanied: Mr. Swapnil V. Ghogardare, Mrs. Renuka. Suvvari.
Industrial Visit: BE MECHANICAL
Subject: Energy audit & management
Location of industry: MEDA Power Plant Chalkewadi , Satara
Date of visit : August 25th 2014
Time of visit: 12-3 P.M.
Faculty advisers: Prof. Kailas Kolekar
Prof. Sushant Pande
Prof. Vinayak Bembrekar
Prof. Ravindra Lahane
Prof. Swati Salunkhe
Prof. Mithila Rajshirke
Instructor: Mr. Rajesh Mohite
No. of Students: 105
Industrial Visit: TE MECHANICAL
Subject: Metrology & Quality control
Location of industry: Aditya Engg. co. ,at post Khalad, Saswad-Jejuri Road, Pune - 44
Date of visit : September 22nd 2014
Time of visit: 10:00 am
Faculty advisers: Mr. Samadhan Bhosale
Mr. Anup Chapale
Mr. Ganesh Lohar
Mr. Vivek Diware
Instructor: Mr. Chakshu Gaydhankar
No. of Students: 240
Industrial Visit: SE MECHANICAL
Subject: Workshop Practice II
Location of industry: Sahayog Auto components, Kudalwadi, Chikhali,Pune
Date of visit : 16th & 17th September 2014
Time of visit: 11:00 am
Faculty advisers: Mr. Samadhan Bhosale
Mr.Sachin Marjapure
Mr.R.Shinde
Mrs.Ipsa Mohapatra
Mr. Swapnil Ghogardare
Instructor: Mr. Hanamant Kumbhar
No. of Students: 230
Industrial Visit: SE MECHANICAL
Subject: Thermodynamics
Location of industry: Sant Tukaram Sahakari Sakhar Karkhana, kasarsai, Pune
Date of visit : August 23rd 2014
Time of visit: 11:00 am
Faculty advisers: Mr.Prashant Darade
Mr.R.Shinde
Mrs.Ipsa Mohapatra
Mr. Santosh Pachpute
Mrs.Swati Salunkhe
Ms. Akshata Methe
No. of Students: 230
Industrial Visit: TE MECHANICAL
Subject: Turbo Machines
Location of industry: Bhatghar Hydro power station,Bhatghar Pune
Date of visit : 30/3/2015 & 31/3/2015
Time of visit: 11:30 am
Faculty advisers: Mr.Samadhan Bhosale
Mr.Vivek Diware
Mr.Prateek Malawe
Mr.Prashant Darade
Mr.Vaibhav Phule
No. of Students: 240
Industrial Visit: BE MECHANICAL
Subject: Power plant Engineering
Location of industry: Sant Tukaram Sugar factory, kasarsai,Pune
Date of visit : 16/02/2015
Time of visit: 11:30 am
Faculty advisers: Mr.Swapnil Ghogardare
Mr.Sushant Pande
Mr.Ravindra lahane
Mr.Vinayak Bembrekar
No. of Students: 130
Guest lecture on Telescope making by Mr. M. D. Karandikar, Ex General Manager, Tata Motors and Member of Jyotirvidya Parisanstha (JVP), Pune.
Faculty Activities
FACULTY ACTIVITIES
Name of faculty |
Date |
Course Name |
Dr.Sachin Jambhale |
Aug - Oct 2023 |
Advanced Machining Process |
Mr. Arun Kumar Battu |
July-Aug 2023 |
Manufacturing Processes - Casting and Joining |
Dr. Sachin Jambhale |
Jan-Apr 2023 |
Computer Integrated Manufacturing |
Mr. Arun Kumar Battu |
Aug -Oct 2022 |
Introduction To Research |
Mr. Arun Kumar Battu |
Aug-Sep 2018 |
Stress Managment |
Mr Vaibhav Phule |
Feb-Apr 2019 |
Joining Technologies for metals |
Mr Vaibhav Phule |
Aug-Sep 2018 |
Principles of Casting Technology |
Mr Vaibhav Phule |
Jul-Oct 2017 |
Fundamentals of manufacturing processes |
Dr.Tapobrata Dey |
Jul Oct 2018 |
Intellectual Property |
Dr.Tapobrata Dey |
Jul-Aug 2019 |
Leadership |
Dr.Tapobrata Dey |
Aug-Sep2018 |
Laws Of Thermodynamics |
NPTEL COURSES 2023
NPTEL COURSES 2022
NPTEL COURSES 2019
NPTEL COURSES 2018
DME Syllabus Implementation Meeting
Prof. R. S. Hingole organized syllabus Implementation workshop of subject ‘Design of Machine Elements II’ on 4th Jan 2018. Dr. P. J. Awasare and Dr. D. S. Watvisave were the chief guest for the event. During the meeting various aspects were discussed like examination pattern, Question formats, Mark distribution, assessment of answer sheets, etc.
Dr. D. R. Panchagade felicitating the chief guest of workshop Dr. P. J. Awasare.
Dr. R. S. Hingole giving key note speak during workshop.
Five Days Faculty Development Programme On “Modernization in Mechanical Engineering Education ” From December 13, 2016 to December 17, 2016
A Five Days Faculty Development Programme on Modernization in Mechanical Engineering Education From ,December 13, 2016 to December 17, 2016 Organized By Mechanical Engineering Department of D. Y. Patil College of Engineering, Akurdi, Pune-44. Was organized in association with ‘Savitribai Phule Pune University, PUNE’ & “The Institution of Engineers (India) Pune, Local Centre”
Prof. Awasekar sir delivering speech during inauguration ceremony. Some Glimpses of FDP.
Three Days Faculty Development Programme On “Advanced Trends in Engineering & Education” From June 14, 2016 to June 16, 2016
Three Days Faculty Development Programme On “Advanced Trends in Engineering & Education” From June 14, 2016 to June 16, 2016 was organized By Mechanical Engineering Department of D. Y. Patil College of Engineering, Akurdi, Pune. In association with “The Institution of Engineers (India) Pune Local Centre”
Speakers of FDP: Dr. R. K. Goyal, Mr. D. B. Dhone, Mr. P. M Salunkhe, Prof. S. R. Deodas
Speakers of the FDP during inauguration of workshop. (From Left: Mrs. P. Malathi Vice Principal DYPCOE, Mr. D. B. Dhone, Mr. R. K, Goyal Professor COEP, Dr. B. S. Balapgol Principal DYPCOE, Dr. D. R. Panchagade Head, Mechanical.
Prof. R. K. Goyal during Candle Lightening of Saraswati Pooja
Total 181 aspirants have enrolled for faculty development programme.
- First Indian Engineering Deans Council Global Summit on "Engineering Education - Current Scenario & Future Prospect" on 31/07/2015 to 01/08/2015
[ From Left Side Mrs. M. Potey (Head, Computer Engg. DYPCOE) , Mr. K. Narkar (Head, Mechanical Engg. DYPIEMR), Dr. D. R. Panchagade (Head, Mechanical Engg. DYPCOE), , Dr. Hans J Hoyer (Sec. General, IFEES USA), Dr. Alfred B. Ngowi (Dean, Central University of Technology, Free State, SA), Col. S. K. Joshi (Director, D Y Patil Educational Complex, Akurdi, Pune, India), Mr. A. J. Patankar (Head, Information Technology DYPCOE, Akurdi), Dr. Mrs. A. V. Patil (Principal, DYPIEMR Akurdi, Pune), Dr. B. S. Balapgol (Principal, DYPCOE, Akurdi Pune) ]
- Mr. Ravindra S. Lahane has prasented a paper on"Analysis of gear pair contact to predict the efficiency"in 9 th international conference (ICPMAE-2015) held on 16/08/2015 in Pune.
- AUTOEXPO 2014 - State Level Workshop: 5 days AUTOEXPO 2014 event was organized from 18th – 22nd Dec. 2014 at Golibar Maidan, Pune.
- Mr. Sushant S. Pande (Faculty – Mechanical Dept.) of D Y Patil College of Engineering, Akurdi were involved in organizing State Level poster Competition for the topic “Satire on Irresponsible Drivers.”
- 3DPLM – CATIA Certification Course organized by Dassault Systemes CATIA Certification course for SE/TE/BE is organized dated on 18th Jan 2014.
- Awareness Lecture was organized by Mr. Vinayak Bembrekar (Faculty – Mechanical Dept.) for all Mechanical Students for course CATIA, ANSYS, CFD and Hypermesh on 30th Jan 2015.
- Ms. Akshata Methe presented a research paper in PMAI 15 Conference at IIT Bombay during 19th to 21st Jan 2015.
Student Activities
Felicitation of Team Dot4 Gokart by Assistant Commissoner of PCMC
ASTRONOMY AND SPACE SCIENCE CLUB
The Astronomy and Space Science Club has successfully organized a sky gazing trip for students and faculty. Under which we had invites some experts from IUCCA to share the details of the night sky.
Group photograph taken after the event
SPORTS
In January 2018, Inter-college Kabaddi competition was organized by AISSMS College of Engineering, Pune and AIT, Dighi, Pune. Our college team stood runner-up in both the competition under the captainship of Raj Sable (TE Mechanical Student). Also Ketan Kshirsagar (BE Mechanical Student) was the member of the team.
Students receiving trophy from Dr. Hingole sir and Mr. Sanjay Deodas
Team captain Raj Sable receiving the trophy of best player of the tournament award
In February 2018, Inter-college Kabaddi competition was organized by S.B. Patil College of Engineering, Indapur, Pune. Our college team stood Third in the competition under the captainship of Raj Sable (TE Mechanical Student). And Ketan Kshirsagar (BE Mechanical Student) was the member of the team. Also Raj Sable got the best player of the tournament award.
Rahul Gujar (SE Mechanical Student) got second prize in National level basketball competition
- Palash Thakre has successfully completed the NCC training conducted at AIR FORCE academy from June 21, 2015 to July 3, 2015.
- Kaustubh Shaligram has got first prize in acting competition organized by ‘VIHANG – The art Circle’, Nigdi, Pune.
- Kaustubh Shaligram participated in ‘ Symbiosis Karandak’ acting competition organized by ‘Symbiosis college of Arts and Commerce ’, Pune.
- Kaustubh Shaligram has participated in DASTAK (Street Play) in AAROHAN -The cultural festival organized by MIT College of engineering, Pune. The topic of street play was “Bhavishyatil rajkaran ki Rajkaranatil Bhavishya”.
- Kaustubh Shaligram has participated in cultural festival organized by D Y Patil College of engineering, Akurdi Pune. The topic of street play was “Bhavishyatil rajkaran ki Rajkaranatil Bhavishya”.
- Kaustubh Shaligram has participated in ‘Firodiya Karandak 2015’ to play an act of “ME GHANTA ENGINEER”.
[Left Side: Kaustubh Shaligram]
- Students of mechanical engineering have participated in inter collegiate table tennis competition
.
BAJA
2024
e-BAJA SAE India
Venue: BVRIT , Narsapur , Hyderabad |
2024 |
All India Ranking – 1 1st Position : Overall Physical Dynamics, Durability, Suspension and Traction, CAE. 2nd Position : Overall Statics event, Virtual Manuverability, Cost, Engineering Design 3rd Position :Physical Manuverability , Virtual all Terrain Performance |
Team Predators Racing of Secured AIR 1 with 10 awards!!! In SAE India Competition e-BAJA at BVRIT, Hyderabad (TPR generation 15 -Year 2024)
2023
e-BAJA SAE India
Venue: Chitkara University , Baddi , H. P. |
2023 |
All India Ranking – 1 1st Position : Best Debutant Team, 4-Wheel Drive Team, Technology Innovation, Durability, Virtual Dynamics Event Maneuverability, Virtual Dynamics Event All Terrain Performance ,Cost event, 2nd Position : Acceleration 3rd Position : CAE |
The winning team of BAJA SAEINDIA 2023 AIR 1 with 10 awards!!! at Chitkara University Chandigarh (TPR generation 14 -Year 2023)
2022
BAJA SAE India
Venue: Pitampur, Indore, MP |
2022 |
All India Ranking – 1 1st Position : Cost, Manufacturing, Engineering design, Overall virtual dynamics, Virtual S&T, Raftaar, overall physical dynamics, acceleration, Maneuverability, S&T and Durability 2nd Position : Overall Statics, Virtual Maneuverability, Virtual acceleration, Virtual Brake and Sled Pull 3rd Position : Best 4WD Drive |
Team Predators Racing generation 13 (Year 2022)
2021
BAJA SAE India
Venue: Pitampur, Indore, MP |
2021 |
All India Ranking - 2 1st Position : Best 4 Wheel Drive ( 4WD) 1st Position : CAE 1st Position : Maneuverability 2nd Position : Overall Dynamic 3rd Position : Suspension & Traction (S&T) |
Virtual BAJA SAEINDIA in IPG CARMAKER software (Year 2021)
AIR -2 with 5 different Awards
2020
BAJA SAE India Venue: Pitampur, Indore, MP |
2020 |
All India Ranking - 1 (National Champions) 1st Position : Durability 1st Position : Acceleration 1st Position : CAE 1st Position : Raftar Lightest and Fastest Vehicle Designed in India |
BAJA SAE, International Venue: Arizona,USA |
2020 |
World Ranking – 11th 7th Position : Sales 9th Position : Design 12th Position : Cost Event |
Representing at Virtual events -Chitkara University (TPR generation 11 Year 2020)
Women of BAJA (TPR generation 12 Year 2020)
Women of BAJA (Driver Mrunal Argade TPR generation 11 -Year 2020)
AIR -1 with 4 different Awards
2019
BAJA SAE India Venue: Pitampur, Indore, MP |
2019 |
All India Ranking - 2 1st Position : Raftar 2nd Position : Durability 2nd Position : Acceleration 2nd Position : Suspension & Traction (S&T) Lightest Vehicle Designed in India |
BAJA SAE, International Venue: Tennessee,USA
|
2019 |
World Ranking – 11th 1st Position : Acceleration 3rd Position : Cost Event 5th Position : Maneuverability Lightest and Fastest vehicle designed in the World |
International Event - Baja SAE 2019 Tennessee Tech. April 11-14, 2019
- World Rank 1 – Acceleration (Fastest Vehicle)
- World Rank 3- Cost event
- World Rank 5- Maneuverability event
- World Rank 9- Endurance race
- Worlds Lightest Students All Terrain Vehicle (Weight 120.2 Kg)
- World Rank 11- Overall
Team Predators at International BAJA SAE 2019, Tennessee, USA
D Y Patil College of Engineering , Akurdi is Runner-up at National Champion in mBAJA SAE 2019.
Team Predators Racing_10 years of racing blood
Overall 2nd
Raftar 1st
Acceleration 2nd
Suspension & Traction 2nd
Durability 2nd
Team predators of D Y Patil College of engineering Akurdi has won runner up the national level championship in prestigious mBAJA SAE India 2019 competition held at Asia’s biggest auto testing track at Pithampur, Indore in Madhya Pradesh on January 26-27, 2019.
2018
BAJA SAE India Venue: Pitampur, Indore, MP |
2018 |
All India Ranking - 1 (National Champions) 2nd Position : Raftar 3rd Position : Suspension & Traction (S&T) 3rd Position : Durability |
Competitions boost Learning
BAJA Team of DYPCOE, expert opinion in TOI (23rd October 2018)
We are budding engineers of D Y Patil College of Engineering, Akurdi, who have the passion and the will to help the society and to contribute to make the youth of our country employable. We participate in global motorsport competitions, viz. Baja and supra which enable us to simulate real world engineering problems. We design, manufacture and build racing vehicles. We, the passionate minds of D Y Patil innovate and develop the best of our knowledge.
We have been participating in these competitions since last 10 years, transferring knowledge and legacy, along with having a very vivid spectrum of history. The most highlighting of them were when our Baja team, TEAM PREDATORS RACING, stood AIR 1st among 388 teams with a trendsetting pole position in 2018. Also, the same team stood AIR 2nd in 2015. Furthermore, our Baja team took the heat a notch above by participating at international baja at California, USA, where they grabbed 12th best design, and ranked 35th across the globe. Doing well at Baja events equals having companies lined up for the respective engineering students during their college placements. Activities like these mean real money, real hardwork, real risk and real victory. We have teammates from both the teams placed in various MNCs. The reason behind this was found to be the immense exposure that the students received towards the technical and management related real life engineering applications through these competitions, helping them to make themselves industry ready.
D Y Patil College of Engineering , Akurdi is National Champion in mBAJA SAE 2018.
Team predators of D Y Patil College of engineering Akurdi has won the national level championship in prestigious mBAJA SAE India 2018 competition held at Asia’s biggest auto testing track at Pithampur, Indore in Madhya Pradesh on January 28, 2018. This winning team received prize money of Rs. 3 Lakhs.
The team BAJA has been participating since last 10 years and was runners up in 2015. The team also participated in International SAE BAJA 2017 at LA, California USA. The national SAE BAJA competition was organized by Mahindra and Mahindra and in all 200 teams from various technical institutes across the country had participated in this competition. The team was led by Captain Shubham Sutar and Vice captain Aditya Gawale under the guidance of Dr. D. R. Panchagade HOD, Mechanical, Prof. Sunil Patil Faculty Advisor.
SAE BAJA 2018 Team was financially supported by the management of Dr. D. Y Patil Educational Complex, Akurdi and got valuable guidance from Hon. Shri. Satej D. Patil (Chairman), Hon. Col. S.K. Joshi (Campus Director) , Dr. B. S. Balapgol (Principal), Dr. Mrs. P. Malathi (Vice Principal and Dr. D. R. Panchagade, HOD Mechanical.
Welcome to DYPCOE’s SAE BAJA Team “Team Predators” 2017-18
What do we do at SAE Baja?
SAE BAJA is a student-led organization that designs and constructs an off-road racing car each year in pursuit of a perfect balance of speed, strength, and endurance. We design, build, fund, and race our car ourselves, with some help from corporate partners and private citizens.
Who we are?
We are a small group of students, returning Thirty one this year, who come from a variety of places, backgrounds, and majors. Together, we work, learn, and travel in pursuit of our goal to win at our race. Those who stick with the team become part of a family, and learn to work as a team not only for today, but also for future careers.
Welcome to DYPCOE’s SAE BAJA Team “Team Predators” 2016-17
What do we do at SAE Baja?
SAE BAJA is a student-led organization that designs and constructs an off-road racing car each year in pursuit of a perfect balance of speed, strength, and endurance. We design, build, fund, and race our car ourselves, with some help from corporate partners and private citizens.
Who we are?
We are a small group of students, returning Thirty one this year, who come from a variety of places, backgrounds, and majors. Together, we work, learn, and travel in pursuit of our goal to win at our race. Those who stick with the team become part of a family, and learn to work as a team not only for today, but also for future careers.
2015 - 2016 Sponsors
Sr. No. |
Sponsor |
Sponsorship Category |
1 |
Apollo Institutes |
Knowledge Partner |
2 |
Ajil Fibertech |
Manufacturing Partner |
3 |
Toolroom Engineering |
Manufacturing Partner |
4 |
Ravian Engineering |
Manufacturing Partner |
5 |
Sahayog Tools |
Quality Control Partner |
6 |
MPC News |
Media Partner |
7 |
Banana Wraps |
Bodyworks Partner |
8 |
Gurukrupa Industries |
Manufacturing Partner |
9 |
Karuna Engineering |
Manufacturing Partner |
For Sponsorship
If you would like to contact Team Predators about becoming a sponsor, please contact:
Faculty Advisor's:
Prof. S. S. Patil This email address is being protected from spambots. You need JavaScript enabled to view it.
Team Email Id- This email address is being protected from spambots. You need JavaScript enabled to view it.
Student Coordinators:
Pritam Kamate Captain
Prakash Sahu Vice-Captain
Team Predators
Faculty Advisor's- Mr. A. K. Battu and Mr. Prashant Darade
Captain- Kamesh Jagtap
Vice-Captain- Mansoor Nadaf
Team Members-
Kamesh Jagtap, Mansoor Nadaf, Iklakh Sayyed, Yatish Baviskar, Nidhi Nair, Nisha Anagolkar, Pratik Parmale, Tanaji Lote, Akash Deokate, Hatim Bohari, Pritam Kamathe, Rahul Ghule, Abhishek Sase, Ambarish Deshpande, Lokesh Dhake, Anmay Shedge, Yogesh Rathod, Prakash Sahu, Suraj Rautrao, Sagar Prajapati, Sachin Palwe, Vaibhav Deokar, Mahesh Borse, Rahul Gadade, Pushkar Umrikar, Saurabh Wanganekar, Krishna Upadhyay, Kunal Shinde, Chandramani Singh, Tanmay Rathod, Aditya Gawale
- BAJA SAE INDIA 2017
Previous Events and Achievements
- BAJA SAE INDIA 2015 – AIR 2
- International Go-Kart Championship 2014 – AIR 1, Best Auto Cross, Best Build Quality and Best Design Evaluation Award
- National Go-Kart Championship 2014 – AIR 9
- BAJA SAE INDIA 2013 – AIR 6
- BAJA SAE INDIA 2012 – AIR 29
- BAJA SAE INDIA 2011 – AIR 6, Technology Innovation Award
- BAJA SAE INDIA 2010 – AIR 9
Contact Us
Team Captains:
Kamesh Jagtap This email address is being protected from spambots. You need JavaScript enabled to view it.
Mansoor Nadaf This email address is being protected from spambots. You need JavaScript enabled to view it.
Faculty Advisor's:
Mr. A. K. Battu This email address is being protected from spambots. You need JavaScript enabled to view it.
Team Email Id- This email address is being protected from spambots. You need JavaScript enabled to view it.
Gallery
Beyond Boundaries….. (TPR generation 6 Year 2012)
Team Predators Racing Generation 4th (Year 2011)
The team continues to expand with every generation….. (TPR generation 4 Year 2011)
Team Predators Racing Generation 3rd (Year 2010)
Team Predators Racing Generation 2nd (Year 2009)
SUPRA
SAE supra 2018-19
SAE SURA INDIA 2018 was conducted in Delhi at Buddha International Circuit. In which 120 team were participated out of which our team scored 10thrank from among all, also awarded runner up in skid pad event.
TMF award winning moment in SPURA 2018 for skid pad event
Faculty Advisers:
Prof. Vikram Kulkarni
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Prof. Sagar Desai
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Student Coordinators:
- Kiran Surase
- Arnold
TEAM “The Metal Falcons”
Captain: Kiran Surase (This email address is being protected from spambots. You need JavaScript enabled to view it.)
Co-captain: Arnold
SAE supra 2017-18
What do we do at SAE SUPRA?
The SUPRA SAE INDIA is a forthcoming competition which presents the Under Graduate Students the task of designing, modeling and fabricating a formula type racing car.
As an event that challenges young minds to compete as teams in designing a Formula category vehicle, there is no other event like this in the country. To develop a vehicle consisting of various sub systems, meeting engineering specifications, timelines and above all meeting safety standards is a challenge not for the faint hearted. And then making the rubber hit the road at a premium race track under gazing eyes of experienced technical experts and other enthusiasts is a thrill not just for the participants, but for the mobility community at large
Who are we?
We are a group of 25 undergraduate students working under the SAE India Collegiate Club, designing and fabricating a formula car prototype to represent D. Y. Patil College of Engineering Akurdi, Pune at the SUPRA SAEINDIA and NIRMAN GOKART RACING
2017 - 2018 Sponsors
Fixed: Altair, Sai Raj Enterprises, Area44, Rajesh Precise Perforation, Pooja Engineering Works, 3RFRP, Venus Engineering, MPC News.
Probable: GISI, Cuchins
Sponsorship
If you would like to contact SAE Supra about becoming a sponsor, please contact
Faculty Advisers:
Prof. Vikram Kulkarni
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Prof. Sagar Desai
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Student Coordinators:
- Vivek Gawali
- Aditya Bochare
TEAM “The Metal Falcons”
Captain: Vivek Gawali
Co-captain: Aditya Bochare
Team Members:
Vivek Gawali, Aditya Bochare, Vipul Kadam, Lalit Perkar, Shubhada Janotkar, Manish Chettiar, Rayees Shaikh, Rushiraj Kadge, Manohar Gade, Akshay Markad, Sangramsing Parmar, Santosh Barhatte, Adesh Khade, Kaustubh Pawale, Mukesh Sarkar, Akshay Bhande, Sanket Wavdhane, Ajinkya Burande, Shubham Kharabe, Sarvesh Pawar, Vivek Jha, Aniket Vishwakarma, Bhushan Pawar, Manali Patne, Rushikesh Patil, Shubham Khose, Shweta Lad, Abhinav Raj, Chitransh Agarwal, Niranjan Londhe, Kiran Surase, Akshay Patil, Onkar Powar |
Upcoming Events
SUPRA SAEINDIA 2018 is a forthcoming competition which presents the Under Graduate Engineering Students the task of designing, modeling and fabricating a formula type racing car.
Previous Events
1. SUPRA SAE INDIA 2017:
· Runner up in BEST ENGINEERING DESIGN AWARD
· Runner up in CAE AWARD
2. SUPRA SAE INDIA 2014:
Vehicle: Merlin 1.0
Virtual Rank:AIR 67
Final Rank: AIR 65
3. SUPRA SAE INDIA 2015:
Vehicle: Merlin 2.0
Virtual Rank: AIR 31
Final Rank: AIR 9
Contact Us
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Faculty Advisor:
Prof. Vikram Kulkarni
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Prof. Sagar Desai
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Gallery
SAE supra 2016-17
What do we do at SAE SUPRA?
The SUPRA SAE INDIA is a forthcoming competition which presents the Under Graduate Students the task of designing, modeling and fabricating a formula type racing car.
As an event that challenges young minds to compete as teams in designing a Formula category vehicle, there is no other event like this in the country. To develop a vehicle consisting of various sub systems, meeting engineering specifications, timelines and above all meeting safety standards is a challenge not for the faint hearted. And then making the rubber hit the road at a premium race track under gazing eyes of experienced technical experts and other enthusiasts is a thrill not just for the participants, but for the mobility community at large
Who are we?
We are a group of 25 undergraduate students working under the SAE India Collegiate Club, designing and fabricating a formula car prototype to represent D. Y. Patil College of Engineering Akurdi, Pune at the SUPRA SAEINDIA and NIRMAN GOKART RACING
2015 - 2016 Sponsors
Fixed: Altair, Sai Raj Enterprises, Area44, Rajesh Precise Perforation, Pooja Engineering Works, 3RFRP, Venus Engineering, MPC News.
Probable: GISI, Cuchins
Sponsorship
If you would like to contact SAE Supra about becoming a sponsor, please contact
Faculty Advisers:
Prof. Vikram Kulkarni
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Prof. Sagar Desai
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Student Coordinators:
- Ashish Mali This email address is being protected from spambots. You need JavaScript enabled to view it.
- Harshal Darade This email address is being protected from spambots. You need JavaScript enabled to view it.
TEAM “The Metal Falcons”
Captain: Harshal Darade
Co-captain: Ashish Mali
Team Members:
Harshal Darade, Ashish Mali, Prasad Asabe, Vipul Kadam, Vivek Gawali, Nilesh Kshirsagar, Akshay Gaikwad, Anupama Nair, Soniya Basale, Aditya Bochare, Chirag Panchal, Lalit Perkar, Rushiraj Kadge, Sangramsing Parmar, Santosh Barhatte, Dnyaneshwar Pawar, Manish Chettiar, Rayees Shaikh, Manohar Gade, Akshay Markad, Amruta Daundkar, Shubhada Janotkar, Adesh Khade, Kaustubh Pawale, Mukesh Sarkar
Upcoming Events
SUPRA SAEINDIA 2016is a forthcoming competition which presents the Under Graduate Engineering Students the task of designing, modeling and fabricating a formula type racing car. [Expected Date: Mid of July 2016]
Previous Events
1. SUPRA SAE INDIA 2014:
Vehicle: Merlin 1.0
Virtual Rank:AIR 67
Final Rank: AIR 65
2. SUPRA SAE INDIA 2015:
Vehicle: Merlin 2.0
Virtual Rank: AIR 31
Final Rank: AIR 9
Prof. Sushant Pande received “Dronacharya Award” for best Faculty Advisor over 167 teams.
Contact Us
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Faculty Advisor:
Prof. Vikram Kulkarni
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Prof. Nilesh Birajdar
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Student Coordinators:
Harshal Darade (Captain)
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Ashish Mali (Vice-Captain)
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Gallery
Go-Kart
Dot4 Gokart Team
Team Dot4 won Runner up in design for competition held at PCNTDA, Moshi (PCMC) Pune
Recent Achievement:
Event Details:
Date: 22-25 March 2019
Venue: PCNTDA, Moshi Pune
What do we do at Nirman Go-Kart championship?
Nirman is a competition to bring out and enhance good engineering approach and practice for graduating and diploma students of engineering. The Championship is basically to design and fabricate a Go-Kart in extremely low budget followed by a Championship of the selected teams. This Championship will consist of several tests and tasks to be performed by the vehicle and qualifying the same will decide their existence in the Championship. All the participating teams will be having creativity and innovation flexibility with few restrictions mentioned in the Rule Book. The Championship gives teams the chance to demonstrate and prove both their creativity and their engineering skills in comparison to the teams from other Universities across the world.
Website: http://nirmangokart.com
Recent Achievement:
Event Details:
Date: 11th and 12th April 2016
Venue: Traffic Park, Moshi Pune
Vehicle Number: NIR21
Vehicle name: Eleanor 1.0
Our achievements:
- All India Ranking 1st Award
- Best Engineering Design award
Who are we?
We are a group of 25 undergraduate students working under the SAE India Collegiate Club, designing and fabricating a single seated go-kart vehicle prototype to represent D. Y. Patil College of Engineering Akurdi, Pune at the NIRMAN GOKART CHAMPIONSHIP
2015 - 2016 Sponsors
Eleation,Altair, Sai Raj Engineering, Area44, Toolroom Engineering and Services, 3RFRP, Venus Tech, MPC News, Elite Laser cutting, Biker’s Point
Sponsorship
If you would like to contact SAE Supra about becoming a sponsor, please contact
Faculty Advisers:
Prof. Deepak Patil
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Prof. Rachit Roshan
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Student Coordinators:
- Sahil Mode
- Saurabh Dhumal
TEAM “The Metal Falcons”
Captain: Sahil Mode
Co-captain: Saurabh Dhumal
Team Members:
Harshal Darade, Ashish Mali, Prasad Asabe, Vipul Kadam, Vivek Gawali, Nilesh Kshirsagar, Akshay Gaikwad, Anupama Nair, Soniya Basale, Aditya Bochare, Chirag Panchal, Lalit Perkar, Rushiraj Kadge, Sangramsing Parmar, Santosh Barhatte, Dnyaneshwar Pawar, Manish Chettiar, Rayees Shaikh, Manohar Gade, Akshay Markad, Amruta Daundkar, Shubhada Janotkar, Adesh Khade, Kaustubh Pawale, Mukesh Sarkar
Upcoming Events
SUPRA SAEINDIA 2016is a forthcoming competition which presents the Under Graduate Engineering Students the task of designing, modelling and fabricating a formula type racing car. [Expected Date: Mid of July 2016]
Previous Events
NIRMAN Go-kart Racing 2014 is an engineering design competition for undergraduate and graduate engineering students. Each team's goal is to design and build a single-seat, Go Kart vehicle whose structure contains the driver.
Contact Us
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Faculty Advisor:
Prof. Vikram Kulkarni
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Prof. Nilesh Birajdar
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Student Coordinators:
Harshal Darade (Captain)
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Ashish Mali (Vice-Captain)
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Gallery
MESA
MESA inauguration ceremony held on 21th Sept, 2018 by mechanical engineering students association. Also Teacher’s day celebration event is conducted under the same.
Glimpse of Inauguration of MESA (2018)
MESA inauguration ceremony is organized on 8th Sept, 2016 by mechanical engineering students association. Also Teacher’s day celebration event is conducted under the same. |
Aptitude Test and Group Discussion Session for Mechanical Engineering Students is organized by MESA on 20th Dec 2016
Students of Mechanical Engineering department during Aptitude Test and Group discussion competition
State Level Robotics Workshop was organized by MESA on 7th to 8th Jan 2017 in association with Institution of Engineers India
Dr. D. R. Panchagade expressing his vies on Industrial Robotics along with CEO of PMS robotics Mr. P. M. Salunke Sir
Students of MESA committee have participated in AUTOEXPO 2K17 Pune
MESA Students have participated in AUTO-EXPO 2K17 Pune. Some glimpses of the AUTO-EXPO 2K17 with industry personnels and CEOs.
TMF AUTOEXPO 2K17: A Two Days workshop on Design, manufacturing and Assembly of Student formula 1 car and Go-kart cars was organized by MESA and SUPRA students
MESA has organised Formula 1 racing car workshop in association with "The Institute of Engineers, India". Some glimpses of the Workshop.
Students of TE Mechanical Engineering (Mechanical Engineering Students Association) have organized FAREWELL to their Senior friends.
IEISC
Students' Chapter: Institution of Engineers (India)
The guest lecture on “Employability Skills” was arranged to give an idea about how to tackle with the employability. The TE and BE Mechanical students were present for this session. Total 156 students were present for the session along with department faculty members.
Dr. R. S. Hingole felicitating guest Mr. Ravindra Naik
Mr. Ravindra Naik, Faculty members and Students of IEI Students’ Chapter
Inauguration of “The Institution of Engineers” Students Chapter is done on 5th Oct 2016. Delegates from the IEI Pune Local Centre came for the Inauguration function. SE, TE and BE students have attended the inauguration session.
Date: 5th Oct, 2016
Names of the Guests:
· Er. A. K. Nighojkar, Hon. Secretary, PLC IEI
· Prof. K. K. Ghosh, Form. Hon. Sec., PLC IEI
Er. V. V. Munot, Committee Member, PLC IEI
Stu Students Membership Details
Sr. No. |
NAME OF STUDENT |
MEMBERSHIP NUMBER |
YEAR OF ENROLLMENT |
BRANCH |
1. |
UTKARSHA BANKAR |
411044/DYPI/MC/001 |
2016-17 |
MECHANICAL |
2. |
VIKRANT HARANKHEDE |
411044/DYPI/MC/002 |
2016-17 |
MECHANICAL |
3. |
ADITYA PALKAR |
411044/DYPI/MC/003 |
2016-17 |
MECHANICAL |
4. |
NEHA SHIVANE |
411044/DYPI/MC/004 |
2016-17 |
MECHANICAL |
5. |
RUTUJA ADSARE |
411044/DYPI/MC/005 |
2016-17 |
MECHANICAL |
6. |
INDRANEEL BAPAT |
411044/DYPI/MC/006 |
2016-17 |
MECHANICAL |
7. |
PRATIK CHUTE |
411044/DYPI/MC/007 |
2016-17 |
MECHANICAL |
8. |
VIVEK JHA |
411044/DYPI/MC/008 |
2016-17 |
MECHANICAL |
9. |
HARSHAVARDHAN JADHAV |
411044/DYPI/MC/009 |
2016-17 |
MECHANICAL |
10. |
CHITRANSH AGARWAL |
411044/DYPI/MC/010 |
2016-17 |
MECHANICAL |
11. |
MAKARANDA DARADE |
411044/DYPI/MC/011 |
2016-17 |
MECHANICAL |
12. |
YASH SHUKLA |
411044/DYPI/MC/012 |
2016-17 |
MECHANICAL |
13. |
ROHIT GHADWAJE |
411044/DYPI/MC/013 |
2016-17 |
MECHANICAL |
14. |
SAYALI GUJAR |
411044/DYPI/MC/014 |
2016-17 |
MECHANICAL |
15. |
ASHWINI DEOKAR |
411044/DYPI/MC/015 |
2016-17 |
MECHANICAL |
16. |
ABHINAV RAJ |
411044/DYPI/MC/016 |
2016-17 |
MECHANICAL |
17. |
GOPESH JANGID |
411044/DYPI/MC/017 |
2016-17 |
MECHANICAL |
18. |
ANIRUDDHA RAMAKRISHNAN |
411044/DYPI/MC/018 |
2016-17 |
MECHANICAL |
19. |
SHRUTI JAGADI |
411044/DYPI/MC/019 |
2016-17 |
MECHANICAL |
20. |
AKSHAY SOMVANSHI |
411044/DYPI/MC/020 |
2016-17 |
MECHANICAL |
21. |
NISHA KADAM |
411044/DYPI/MC/021 |
2016-17 |
MECHANICAL |
22. |
YOGESH AHIRE |
411044/DYPI/MC/022 |
2016-17 |
MECHANICAL |
23. |
SANDIP INGLE |
411044/DYPI/MC/023 |
2016-17 |
MECHANICAL |
24. |
DIPTI GADEKAR |
411044/DYPI/MC/024 |
2016-17 |
MECHANICAL |
25. |
ADINATH KAMBLE |
411044/DYPI/MC/025 |
2016-17 |
MECHANICAL |
26. |
SHREAS PATIL |
411044/DYPI/MC/026 |
2016-17 |
MECHANICAL |
27. |
AJAY JAWALE |
411044/DYPI/MC/027 |
2016-17 |
MECHANICAL |
28. |
ISHWAR DHAGE |
411044/DYPI/MC/028 |
2016-17 |
MECHANICAL |
29. |
HIMANSHU BHOSALE |
411044/DYPI/MC/029 |
2016-17 |
MECHANICAL |
30. |
AKSHAY TARGE |
411044/DYPI/MC/030 |
2016-17 |
MECHANICAL |
31. |
VAIBHAV WAGH |
411044/DYPI/MC/031 |
2016-17 |
MECHANICAL |
32. |
ADARSH KUMAR JHA |
411044/DYPI/MC/032 |
2016-17 |
MECHANICAL |
33. |
BHAVESH SHARMA |
411044/DYPI/MC/033 |
2016-17 |
MECHANICAL |
Gallery:
Prof. K. K. Ghosh Delivering lecture regarding privileges of IEI Students Chapter
Students of IEI ‘Students Chapter’ with Guests and Head, Mechanical DYPCOE AK