Course code :  203156                                                       Subject:  Electrical and Electronics Engineering

CO No.

Course Outcome

 203156.1

APPLY programming concepts to UNDERSTAND role of Microprocessor and Microcontroller in embedded systems.

 203156.2

DEVELOP interfacing of different types of sensors and other hardware devices with Atmega328 based Arduino Board.

 203156.3

UNDERSTAND the operation of DC motor, its speed control methods and braking

 203156.4

DISTINGUISH between types of three phase induction motor and its characteristic features.

 203156.5

EXPLAIN about emerging technology of Electric Vehicle (EV) and its modular subsystems

 203156.6

CHOOSE energy storage devices and electrical drives for EVs.

Course code :  202044                                                       Subject:  Engineering Materials and Metallurgy

CO No.

Course Outcome

 202044.1

COMPARE crystal structures and ASSESS different lattice parameters.

 202044.2

CORRELATE crystal structures and imperfections in crystals with mechanical behaviour of materials.

 202044.3

DIFFERENTIATE and DETERMINE mechanical properties using destructive and nondestructive testing of materials.

 202044.4

IDENTIFY & ESTIMATE different parameters of the system viz., phases, variables, component, grains, grain boundary, and degree of freedom. etc.

 202044.5

ANALYSE effect of alloying element & heat treatment on properties of ferrous & nonferrous alloy.

 202044.6

SELECT appropriate materials for various applications.

Course code :  202042                                                       Subject:  Solid Modeling and Drafting

CO No.

Course Outcome

 202042.1

UNDERSTAND basic concepts of CAD system, need and scope in Product Lifecycle Management.

 202042.2

UTILIZE knowledge of curves and surfacing features and methods to create complex solid geometry.

 202042.3

CONSTRUCT solid models, assemblies using various modeling techniques & PERFORM mass property analysis, including creating and using a coordinate system.

 202042.4

APPLY geometric transformations to simple 2D geometries.

 202042.5

USE CAD model data for various CAD based engineering applications viz. production drawings, 3D printing, FEA, CFD, MBD, CAE, CAM, etc.

 202042.6

USE PMI & MBD approach for communication.

Course code :  202041                                                       Subject:  Solid Mechanics

CO No.

Course Outcome

 202041.1

DEFINE various types of stresses and strain developed on determinate and indeterminate members.

 202041.2

DRAW Shear force and bending moment diagram for various types of transverse loading and support.

 202041.3

COMPUTE the slope & deflection, bending stresses and shear stresses on a beam.

 202041.4

CALCULATE torsional shear stress in shaft and buckling on the column.

 202041.5

APPLY the concept of principal stresses and theories of failure to determine stresses on a 2-D element.

 202041.6

UTILIZE the concepts of SFD & BMD, torsion and principal stresses to solve combined loading application based problems.

Course code :  202043                                          Subject: Engineering Thermodynamics

CO No.

Course Outcome

 202043.1

DESCRIBE the basics of thermodynamics with heat and work interactions.

 202043.2

APPLY laws of thermodynamics to steady flow and non-flow processes.

 202043.3

APPLY entropy, available and non-available energy for an Open and Closed System.

 202043.4

DETERMINE the properties of steam and their effect on performance of vapour power cycle.

 202043.5

ANALYSE the fuel combustion process and products of combustion.

 202043.6

Course code :  302041                              Subject: Numerical & Statistical Methods

CO No.

Course Outcome

 302041.1

SOLVE system of equations using direct and iterative numerical methods.

 302041.2

ESTIMATE solutions for differential equations using numerical techniques.

 302041.3

DEVELOP solution for engineering applications with numerical integration.

 302041.4

DESIGN and CREATE a model using a curve fitting and regression analysis.

 302041.5

APPLY statistical Technique for quantitative data analysis.

 302041.6

DEMONSTRATE the data, using the concepts of probability and linear algebra.

Course code :  302042                                                     Subject: Heat & Mass Transfer

CO No.

Course Outcome

 302042.1

ANALYZE & APPLY the modes of heat transfer equations for one dimensional thermal system..

 302042.2

DESIGN a thermal system considering fins, thermal insulation and & Transient heat conduction.

 302042.3

EVALUATE the heat transfer rate in natural and forced convection & validate with experimentation results.

 302042.4

INTERPRET heat transfer by radiation between objects with simple geometries, for black and grey surfaces.

 302042.5

ABILITY to analyze the rate of mass transfer using Fick’s Law of Diffusion and understands mass diffusion in different coordinate systems.

 302042.6

DESIGN & ANALYSIS of heat transfer equipments and investigation of its performance.

Course code :  302043                                          Subject: Design of Machine Elements

CO No.

Course Outcome

 302043.1

DESIGN  AND  ANALYZE  the  cotter  and  knuckle  Joints,  levers  and  components

subjected to eccentric loading

 302043.2

DESIGN shafts, keys and couplings under static loading conditions.

 302043.3

ANALYZE different stresses in power screws and APPLY those in the procedure to design screw jack.

 302043.4

 EVALUATE dimensions of machine components under fluctuating loads.

 302043.5

EVALUATE & INTERPRET the stress developed on the different type of welded and threaded joints

 302043.6

APPLY the design and development procedure for different types of springs..

Course code :  302044                                                   Subject: Mechatronics

CO No.

Course Outcome

 302044.1

DEFINE key elements of mechatronics, principle of sensor and its characteristics.

 302044.2

UTILIZE concept of signal processing and MAKE use of interfacing systems such as ADC, DAC, Digital I/O.

 302044.3

DETERMINE the transfer function by using block diagram reduction technique..

 302044.4

EVALUATE Poles and Zero, frequency domain parameter for mathematical modeling for mechanical system.

 302044.5

APPLY the concept of different controller modes to an industrial application.

 302044.6

DEVELOP the ladder programming for industrial application

Course code :  302045                                Subject: Elective I (Machining Science &Technology)

CO No.

Course Outcome

 302045.1

DEFINE metal cutting principles and mechanics of metal cutting and tool life. 

 302045.2

DESCRIBE features of gear and thread manufacturing processes

 302045.3

SELECT appropriate grinding wheel and demonstrate the various surface finishing processes.

 302045.4

SELECT appropriate jigs/fixtures and to draw the process plan for a given component. 

 302045.5

 SELECT & EVALUATE various parameters of process planning.

 302045.6

GENERATE CNC program for Turning / Milling processes and generate tool path using CAM software..

Course code :  302046                                                  Subject: Digital Manufacturing Laboratory

CO No.

Course Outcome

 302046.1

DEVELOP a component using conventional machines, CNC machines and Additive Manufacturing Techniques

 302046.2

ANALYZE cutting tool parameters for machining given job.

 302046.3

DEMONSTRATE simulation of manufacturing process using Digital Manufacturing Tools..

 302046.4

SELECT and DESIGN jigs and Fixtures for a given component..

 302046.5

DEMONESTRATE different parameters for CNC retrofitting and reconditioning.

Course code :  402041                                 Subject: Heating Ventilation Air-Conditioning and Refrigeration

CO No.

Course Outcome

 402041.1

ANALYSE different air-craft refrigeration systems and EXPLAIN the properties, applications and environmental issues of different refrigerants

 402041.2

ANALYSE multi pressure refrigeration system used for refrigeration applications.

 402041.3

 DISCUSS types of compressors, condensers, evaporators and expansion valves along with regulatory and safety controls and DESCRIBES Trans critical and ejector refrigeration systems.

 402041.4

ESTIMATE cooling load for air conditioning systems used with concern of design conditions and indoor quality of air.

 402041.5

DESIGN air distribution system along with consideration of ventilation and infiltration.

 402041.6

EXPLAIN the working of types of desiccants, evaporative, thermal storage, radiant cooling, clean room and heat pump systems.

Course code :  402042                                     Subject: Dynamics of Machinery

CO No.

Course Outcome

 402042.1

APPLY balancing technique for static and dynamic balancing of multi cylinder inline and radial engines.

 402042.2

ANALYZE the gyroscopic couple or effect for stabilization of Ship, Airplane and Four wheeler vehicles.

 402042.3

ESTIMATE natural frequency for single DOF un-damped & damped free vibratory systems

 402042.4

DETERMINE response to forced vibrations due to harmonic excitation, base excitation and excitation due to unbalance forces.

 402042.5

ESTIMATE natural frequencies, mode shapes for 2 DOF un-damped free longitudinal and torsional vibratory systems.

 402042.6

DESCRIBE noise and vibration measuring instruments for industrial / real life applications along with suitable method for noise and vibration control..

Course code :  402043                                          Subject: Turbomachinery

CO No.

Course Outcome

 402043.1

VALIDATE impulse moment principle using flat, inclined and curved surfaces and INVESTIGATE performance characteristics of hydraulic turbines.

 402043.2

DETERMINE performance parameters of impulse and reaction steam turbine along with discussion of nozzles, governing mechanism & losses.

 402043.3

MEASURE performance parameters of single & multistage centrifugal pumps along with discussion of cavitation and selection

 402043.4

EXPLAIN performance parameters of centrifugal compressor along with discussion of theoretical aspects of axial compressor.

Course code :  402044C                                 Subject: Modern Machining Processes

CO No.

Course Outcome

 402044A.1

UNDERSTAND and ANALYZE the mechanism, process parameters of mechanical assisted modern machining processes.

 402044A.2

UNDERSTAND the mechanism, construction and working of laser, plasma and electron beam assisted machining.

 402044A.3

CLASSIFY and ANALYZE the mechanism, process parameters of the chemical and electrochemical machining.

 402044A.4

RELATE and ANALYZE the mechanism and select process parameters Electrical Discharge Machining for an application.

 402044A.5

ILLUSTRATE the application of micromachining processes.

 402044A.6

SUGGEST appropriate nan machining process for the specific application.

Course code :  402044D                                       Subject: Industrial Engineering

CO No.

Course Outcome

 402044D.1   

EVALUATE the productivity and IMPLEMENT various productivity improvement techniques.

 402044D.2 

APPLY work study techniques and UNDERSTANDS its importance for better productivity.

 402044D.3  

DEMONSTRATE the ability to SELECT plant location, appropriate layout and material handling equipment.

 402044D.4   

USE of Production planning and control tools for effective planning, scheduling and managing the shop floor control..

 402044D.5

PLAN inventory requirements and EXERCISE effective control on manufacturing requirements

 402044D.6   

APPLY Ergonomics and legislations for human comfort at work place and UNDERSTANDS the role of value engineering in improving productivity.

Course code :  402045A                                      Subject: Product Design and Development

CO No.

Course Outcome

 402045A.1  

UNDERSTAND Product design and Product development processes.

 402045A.2  

UNDERSTAND Processes, tools and techniques for Market Survey & Product Specification Finalization.

 402045A.3  

UNDERSTAND Processes, tools and techniques for Concept Inception, Verification and selection.

 402045A.4  

UNDERSTAND Processes, tools and techniques for Concept Exploration & Development

 402045A.5  

UNDERSTAND Processes, tools and techniques for Design Verification and Validation

 402045A .6 

UNDERSTAND Processes, tools and techniques for Robust Design and Development

Course code :  402045C                                     Subject: Additive Manufacturing

CO No.

Course Outcome

 402045C.1 

USE and CLASSIFY the fundamentals of Additive Manufacturing Technologies for engineering applications.

 402045C.2

 IDENTIFY and CATEGORIZE the methodology to manufacture the products using light-based photo-curing, LASER based technologies and STUDY their applications, benefits..

 402045C.3

 IDENTIFY and CATEGORIZE the methodology to manufacture the products using light-based photo-curing, LASER based technologies and STUDY their applications, benefits.

 402045C.4

SYNTHESIZE, RECOMMEND and DESIGN the suitable material and process for fabrication and build behavior of verities of product.

 402045C.5

DESIGN and CONSTRUCT the AM equipment’s for appropriate applications and the input CAD model.

 402045C.6

DEVELOP the knowledge of additive manufacturing for various real-life applications.

Course code :   207002                                Subject: Engineering Mathematics – III

CO No.

Course Outcome

207002.1

SOLVE higher order linear differential equations and its applications to model and analyze mass spring systems.

207002.2

APPLY Integral transform techniques such as Laplace transform and Fourier transform to solve differential equations involved in vibration theory, heat transfer and related mechanical engineering applications.

207002.3

APPLY Statistical methods like correlation, regression in analyzing and interpreting experimental data applicable to reliability engineering and probability theory in testing and quality control.

207002.4

PERFORM Vector differentiation & integration, analyze the vector fields and APPLY to fluid flow problems

207002.5

SOLVE Partial differential equations such as wave equation, one and two dimensional heat flow equations.

Course code :  202050                                   Subject: Manufacturing Process-I

CO No.

Course Outcome

202050.1

APPRAISE and SELECT appropriate moulding, core making and melting furnace for industrial product casting with minimum casting defects.

202050.2

EVALUATE and CHOOSE suitable metal forming processes for manufacturing of industrial parts with minimal forming defects.

202050.3

ASSESSING sheet metal forming operation to CREATE custom made sheet metal forming dies so as to meet the application requirements and dies does the job consistently and accurately.

202050.4

ANALYZE and SELECT appropriate welding process based on the type of industrial application with minimal welding defects.

202050.5

JUSTIFY the selection of polymer processing method among moulding and extrusion for an application which will produce fewer defects.

202050.6

DETERMINE the composite manufacturing process for a given composite type and component to meet application requirements.

Course code :  202047                                                            Subject: Kinematics of Machinery

CO No.

Course Outcome

202047.1

APPLY kinematic analysis to simple mechanisms.

202047.2

ANALYZE velocity and acceleration in mechanisms by analytical method

202047.3

ANALYZE velocity and acceleration in mechanisms by vector and graphical method

202047.4

SYNTHESIZE a four bar mechanism with analytical and graphical methods.

202047.5

APPLY fundamentals of gear theory as a prerequisite for gear design.

202047.6

CONSTRUCT cam profile for given follower motion.

Course code :  202048                                            Subject: Applied Thermodynamics

CO No.

Course Outcome

202048.1

DETERMINE COP of refrigeration system and ANALYZE psychrometric processes.

202048.2

DISCUSS basics of engine terminology,air standard, fuel air and actual cycles.

202048.3

IDENTIFY factors affecting the combustion performance of SI and CI engines

202048.4

DETERMINE performance parameters of IC Engines and emission control.

202048.5

EXPLAIN working of various IC Engine systems and use of alternative fuels.

202048.6

CALCULATE performance of single and multi stage reciprocating compressors and DISCUSS rotary positive displacement compressors

Course code :  202049                                                 Subject: Fluid Mechanics

CO No.

Course Outcome

202049.1

DETERMINE and APPLY various properties of fluid and the fundamental concepts of fluid mechanics (B2)

202049.2

APPLY the laws of fluid statics and concepts of buoyancy and ANALYSE the basic equation of fluid statics to determine forces on planar and curved surfaces that are submerged in a static fluid. (B3)

202049.3

EVALUATE types of fluid flow and terms associated in fluid kinematics and apply them to determine forces and moments on surfaces of various shapes and simple machines. (B2)

202049.4

APPLY and EVALUATE principles of fluid dynamics to laminar flow .. (B2)

202049.5

ESTIMATE friction and minor losses in internal flows and DETERMINE boundary layer formation over an external surface and hence design simple pipe systems to deliver fluids under specified conditions and also the lossed during the flow of the fluid.(B4)

202049.6

CONSTRUCT mathematical correlation considering dimensionless parameters, also ABLE to predict the performance of prototype using model laws .(B2)

Course code :  202051                                               Subject: Machine Shop

CO No.

Course Outcome

202051.1

PERFORM welding using TIG/ MIG/ Resistance/Gas welding technique

202051.2

MAKE Fibre-reinforced Composites by hand lay-up process or spray lay-up techniques

202051.3

PERFORM cylindrical/surface grinding operation and CALCULATE its machining time

202051.4

DETERMINE number of indexing movements required and acquire skills to PRODUCE a spur gear on a horizontal milling machine

202051.5

PREPARE industry visit report

202051.6

UNDERSTAND procedure of plastic processing

Course code :  202052                                                       Subject: Project Based Learning - II

CO No.

Course Outcome

202052.1

IDENTIFY the real-world problem (possibly of interdisciplinary nature) through a rigorous literature survey and formulate / set relevant aims and objectives.

202052.2

ANALYZE the results and arrive at valid conclusions.

202052.3

ROPOSE a suitable solution based on the fundamentals of mechanical engineering by possibly integration of previously acquired knowledge.

202052.4

CONTRIBUTE to society through proposed solutions by strictly following professional ethics and safety measures.

202052.5

USE of technology in proposed work and demonstrate learning in oral and written form.

Course code :  202043                                          Subject: Engineering Thermodynamics

CO No.

Course Outcome

202043.1

DESCRIBE the basics of thermodynamics with heat and work interactions.

202043.2

APPLY laws of thermodynamics to steady flow and non-flow processes.

202043.3

APPLY entropy, available and non available energy for an Open and Closed System.

202043.4

DETERMINE the properties of steam and their effect on performance of vapour power cycle.

202043.5

ANALYSE the fuel combustion process and products of combustion.

202043.6

Course code :  202041                                                       Subject:  Solid Mechanics

CO No.

Course Outcome

202041.1

DEFINE various types of stresses and strain developed on determinate and indeterminate members.

202041.2

DRAW Shear force and bending moment diagram for various types of transverse loading and support.

202041.3

COMPUTE the slope & deflection, bending stresses and shear stresses on a beam.

202041.4

CALCULATE torsional shear stress in shaft and buckling on the column.

202041.5

APPLY the concept of principal stresses and theories of failure to determine stresses on a 2-D element.

202041.6

UTILIZE the concepts of SFD & BMD, torsion and principal stresses to solve combined loading application based problems.

Course code :  202042                                                       Subject:  Solid Modeling and Drafting

CO No.

Course Outcome

202042.1

UNDERSTAND basic concepts of CAD system, need and scope in Product Lifecycle Management.

202042.2

UTILIZE knowledge of curves and surfacing features and methods to create complex solid geometry.

202042.3

CONSTRUCT solid models, assemblies using various modeling techniques & PERFORM mass property analysis, including creating and using a coordinate system.

202042.4

APPLY geometric transformations to simple 2D geometries.

202042.5

USE CAD model data for various CAD based engineering applications viz. production drawings, 3D printing, FEA, CFD, MBD, CAE, CAM, etc.

202042.6

USE PMI & MBD approach for communication.

Course code :  202044                                                       Subject:  Engineering Materials and Metallurgy

CO No.

Course Outcome

202044.1

COMPARE crystal structures and ASSESS different lattice parameters.

202044.2

CORRELATE crystal structures and imperfections in crystals with mechanical behaviour of materials.

202044.3

DIFFERENTIATE and DETERMINE mechanical properties using destructive and nondestructive testing of materials.

202044.4

IDENTIFY & ESTIMATE different parameters of the system viz., phases, variables, component, grains, grain boundary, and degree of freedom. etc.

202044.5

ANALYSE effect of alloying element & heat treatment on properties of ferrous & nonferrous alloy.

202044.6

SELECT appropriate materials for various applications.

Course code :  203156                                                       Subject:  Electrical and Electronics Engineering

CO No.

Course Outcome

203156.1

APPLY programming concepts to UNDERSTAND role of Microprocessor and Microcontroller in embedded systems.

203156.2

DEVELOP interfacing of different types of sensors and other hardware devices with Atmega328 based Arduino Board.

203156.3

UNDERSTAND the operation of DC motor, its speed control methods and braking.

203156.4

DISTINGUISH between types of three phase induction motor and its characteristic features.

203156.5

EXPLAIN about emerging technology of Electric Vehicle (EV) and its modular subsystems

203156.6

CHOOSE energy storage devices and electrical drives for EVs.

Course code :  302049                               Subject: Artificial Intelligence &Machine Learning

CO No.

Course Outcome

302049.1

DEMONSTRATE fundamentals of artificial intelligence and machine learning

302049.2

APPLY feature extraction and selection techniques.

302049.3

APPLY machine learning algorithms for classification and regression problems

302049.4

DEVISE AND DEVELOP a machine learning model using various steps.

302049.5

EXPLAIN concepts of reinforced and deep learning.

302049.6

SIMULATE machine learning model in mechanical engineering problems.

Course code :  302050                                                      Subject: Computer Aided Engineering

CO No.

Course Outcome

302050.1

UNDERSTAND the basic concepts of Computer Aided Engineering (CAE) and CHARACTERISTICS of various elements required for analysis.

302050.2

NURTURE students about the discretization process and criteria for quality mesh.

302050.3

UNDERSTAND the approaches of Finite Element Method (FEM) and to find displacement and stresses over the body.

302050.4

DEVELOP the knowledge and skills needed to effectively evaluate the results using Finite Element Analysis (FEA).

302050.5

APPLY computational technique to solve complex solid mechanics problems and its loading states

302050.6

STUDY the applications of CAE in the various domains of the Mechanical Engineering.

Course code :  302051                                           Subject: Design of Transmission Systems

CO No.

Course Outcome

302051.1

APPLY the principle of Spur & Helical gear design for industrial application and PREPARE a manufacturing drawing with the concepts of GD&T.

302051.2

EXPLAIN and DESIGN Bevel & Worm gear considering design parameters as per design standards.

302051.3

SELECT&DESIGN Rolling and Sliding Contact Bearings from manufacturer's catalogue for a typical application considering suitable design parameters.

302051.4

DEFINE and DESIGN various types of Clutches, Brakes, used in automobile.

302051.5

APPLY various concept to DESIGN Machine Tool Gear box, for different applications

302051.6

ELABORATE various modes of operation, degree of hybridization and allied terms associated with hybrid electric vehicles.

Course code :  302054                                                     Subject: Fluid Power &Control Laboratory

CO No.

Course Outcome

302054.1

DEFINE working principle of components used in hydraulic and pneumatic systems.

302054.2

IDENTIFY & EXPLAIN various applications of hydraulic and pneumatic systems

302054.3

SELECT an appropriate component required for hydraulic and pneumatic systems using manufactures’ catalogues.

302054.4

SIMULATE & ANALYSE various hydraulic and pneumatic systems for industrial/mobile applications.

302054.5

DESIGN a hydraulic and pneumatic system for the industrial applications.

302054.6

DESIGN & DEMONESTRATE various IoT, PLC based controlling system using hydraulics and pneumatics.

Course code :  302053                                  Subject: Measurement Laboratory

CO No.

Course Outcome

302053.1

 EVALUATE causes of errors in Vernier calipers, micrometers by performing experiments in standard metrological conditions, noting deviations at actual and by plotting cause and effect diagram, to reduce uncertainty in measurement.

302053.2

ANALYZE strain measurement parameters by taking modulus of elasticity in consideration to acknowledge its usage in failure detection and force variations.

302053.3

EXAMINE surface Textures, surface finish using equipment’s like Talysurf and analyze surface finish requirements of metrological equipment’s like gauges, jaws of vernier calipers, micrometers, magnifying glasses of height gauge and more, to optimize surface finish accuracy requirements and cost of measurement.

302053.4

MEASURE the dimensional accuracy using Comparator and limit gauges and appraise their usage in actual measurement or comparison with standards set to reduce measurement lead time 

302053.5

 PERFORM Testing of Flow rate, speed and temperature measurements and their effect on performance in machines and mechanisms like hydraulic or pneumatic trainers, lathe machine etc. to increase repeatability and reproducibility.

302053.6

COMPILE the information of opportunities of entrepreneurships/business in various sectors of metrology like calibrations, testing, coordinate and laser metrology etc in an industry visit report.

Course code :  302052                                                   Subject: Skill Development

CO No.

Course Outcome

302052.1

Analyze the basic principle and mechanism of surface degradation like corrosion triangle in protected or unprotected atmosphere to curtail corrosion formulation

302052.2

Select correct corrosion prevention techniques, in accordance with ASTM standards for a different service conditions including metallurgical and environmental aspects, for improvement in design to control corrosions.

302052.3

Relate the role of surface treatment methods like diffusion and heat treatment as per ASTM standards like G105 for selection of steels and their applications in sectors like Mining, Constructions, Transportation, Fabrication.

302052.4

Select the suitable surface treatments like ion beam, gel and dielectric coating, to improve the surface properties thereby increasing the corrosion resistance in form of powder or suspension.

302052.5

Evaluate different surface coating techniques like cladding, hot dipping, vapor deposition to increase sustainability in high temperature operations to make the surface feasible in high altitude applications like aerospace and relevant domains.

302052.6

Judge surface characterizations like coating thickness, defects and remedies for improvement in topography to reduce surface roughness and improvement in surface performance.

Course code :  302049                               Subject: Numerical & Statistical Methods

CO No.

Course Outcome

302041.1

SOLVE system of equations using direct and iterative numerical methods.

302041.2

ESTIMATE solutions for differential equations using numerical techniques.

302041.3

DEVELOP solution for engineering applications with numerical integration.

302041.4

DESIGN and CREATE a model using a curve fitting and regression analysis.

302041.5

APPLY statistical Technique for quantitative data analysis.

302041.6

DEMONSTRATE the data, using the concepts of probability and linear algebra.

Course code :  302050                                                      Subject: Heat & Mass Transfer

CO No.

Course Outcome

302050.1

ANALYZE & APPLY the modes of heat transfer equations for one dimensional thermal system..

302050.2

DESIGN a thermal system considering fins, thermal insulation and & Transient heat conduction.

302050.3

EVALUATE the heat transfer rate in natural and forced convection & validate with experimentation results.

302050.4

INTERPRET heat transfer by radiation between objects with simple geometries, for black and grey surfaces.

302050.5

ABILITY to analyze the rate of mass transfer using Fick’s Law of Diffusion and understands mass diffusion in different coordinate systems.

302050.6

DESIGN & ANALYSIS of heat transfer equipments and investigation of its performance.

Course code :  302051                                           Subject: Design of Machine Elements

CO No.

Course Outcome

302051.1

APPLY the principle of Spur & Helical gear design for industrial application and PREPARE a manufacturing drawing with the concepts of GD&T.

302051.2

EXPLAIN and DESIGN Bevel & Worm gear considering design parameters as per design standards.

302051.3

SELECT&DESIGN Rolling and Sliding Contact Bearings from manufacturer's catalogue for a typical application considering suitable design parameters.

302051.4

DEFINE and DESIGN various types of Clutches, Brakes, used in automobile.

302051.5

APPLY various concept to DESIGN Machine Tool Gear box, for different applications

302051.6

ELABORATE various modes of operation, degree of hybridization and allied terms associated with hybrid electric vehicles.

Course code :  302054                                                     Subject: Mechatronics

CO No.

Course Outcome

302054.1

DEFINE key elements of mechatronics, principle of sensor and its characteristics.

302054.2

UTILIZE concept of signal processing and MAKE use of interfacing systems such as ADC, DAC, Digital I/O.

302054.3

DETERMINE the transfer function by using block diagram reduction technique..

302054.4

. EVALUATE Poles and Zero, frequency domain parameter for mathematical modeling for mechanical system.

302054.5

APPLY the concept of different controller modes to an industrial application.

302054.6

DEVELOP the ladder programming for industrial application

Course code :  302053                                  Subject: Elective I (Machining Science &Technology)

CO No.

Course Outcome

302053.1

DEFINE metal cutting principles and mechanics of metal cutting and tool life. 

302053.2

DESCRIBE features of gear and thread manufacturing processes

302053.3

SELECT appropriate grinding wheel and demonstrate the various surface finishing processes.

302053.4

SELECT appropriate jigs/fixtures and to draw the process plan for a given component. 

302053.5

 SELECT & EVALUATE various parameters of process planning.

302053.6

GENERATE CNC program for Turning / Milling processes and generate tool path using CAM software..

Course code :  302052                                                   Subject: Digital Manufacturing Laboratory

CO No.

Course Outcome

302052.1

DEVELOP a component using conventional machines, CNC machines and Additive Manufacturing Techniques

302052.2

ANALYZE cutting tool parameters for machining given job.

302052.3

DEMONSTRATE simulation of manufacturing process using Digital Manufacturing Tools..

302052.4

SELECT and DESIGN jigs and Fixtures for a given component..

302052.5

DEMONESTRATE different parameters for CNC retrofitting and reconditioning.

Course code :  402049                               Subject: Energy Engineering

CO No.

Course Outcome

402049.1

Describe the power generation scenario, the layout components of thermal power plant and analyze the improved Rankin cycle, Cogeneration cycle

402049.2

Analyze the steam condensers, recognize the an environmental impacts of thermal power plant and method to control the same

402049.3

Recognize the layout, component details of hydroelectric power plant and nuclear power plant

402049.4

Realize the details of diesel power plant, gas power plant and analyze gas turbine power cycle.

402049.5

Emphasize the fundaments of non-conventional power plants.

402049.6

Describe the different power plant electrical instruments and basic principles of economics of power generation.

Course code :  402050                                                      Subject: ELE III Robotics

CO No.

Course Outcome

402050.1

UNDERSTAND the basic concepts of Computer Aided Engineering (CAE) and CHARACTERISTICS of various elements required for analysis.

402050.2

NURTURE students about the discretization process and criteria for quality mesh.

402050.3

UNDERSTAND the approaches of Finite Element Method (FEM) and to find displacement and stresses over the body.

402050.4

DEVELOP the knowledge and skills needed to effectively evaluate the results using Finite Element Analysis (FEA).

402050.5

APPLY computational technique to solve complex solid mechanics problems and its loading states

402050.6

STUDY the applications of CAE in the various domains of the Mechanical Engineering.

Course code :  402051                                           Subject: Mechanical System Design

CO No.

Course Outcome

402051.1

APPLY the principle of Spur & Helical gear design for industrial application and PREPARE a manufacturing drawing with the concepts of GD&T.

402051.2

EXPLAIN and DESIGN Bevel & Worm gear considering design parameters as per design standards.

402051.3

SELECT&DESIGN Rolling and Sliding Contact Bearings from manufacturer's catalogue for a typical application considering suitable design parameters.

402051.4

DEFINE and DESIGN various types of Clutches, Brakes, used in automobile.

402051.5

APPLY various concept to DESIGN Machine Tool Gear box, for different applications

402051.6

ELABORATE various modes of operation, degree of hybridization and allied terms associated with hybrid electric vehicles.

Course code :  402054                                                     Subject: ELE IV Advanced Manufacturing Processes

CO No.

Course Outcome

402054.1

DEFINE working principle of components used in hydraulic and pneumatic systems.

402054.2

IDENTIFY & EXPLAIN various applications of hydraulic and pneumatic systems

402054.3

SELECT an appropriate component required for hydraulic and pneumatic systems using manufactures’ catalogues.

402054.4

SIMULATE & ANALYSE various hydraulic and pneumatic systems for industrial/mobile applications.

402054.5

DESIGN a hydraulic and pneumatic system for the industrial applications.

402054.6

DESIGN & DEMONESTRATE various IoT, PLC based controlling system using hydraulics and pneumatics.

Course code :  402053                                  Subject: ELE III Industrial Engineering

CO No.

Course Outcome

402053.1

 EVALUATE causes of errors in Vernier calipers, micrometers by performing experiments in standard metrological conditions, noting deviations at actual and by plotting cause and effect diagram, to reduce uncertainty in measurement.

402053.2

ANALYZE strain measurement parameters by taking modulus of elasticity in consideration to acknowledge its usage in failure detection and force variations.

402053.3

EXAMINE surface Textures, surface finish using equipment’s like Talysurf and analyze surface finish requirements of metrological equipment’s like gauges, jaws of vernier calipers, micrometers, magnifying glasses of height gauge and more, to optimize surface finish accuracy requirements and cost of measurement.

402053.4

MEASURE the dimensional accuracy using Comparator and limit gauges and appraise their usage in actual measurement or comparison with standards set to reduce measurement lead time 

402053.5

 PERFORM Testing of Flow rate, speed and temperature measurements and their effect on performance in machines and mechanisms like hydraulic or pneumatic trainers, lathe machine etc. to increase repeatability and reproducibility.

402053.6

COMPILE the information of opportunities of entrepreneurships/business in various sectors of metrology like calibrations, testing, coordinate and laser metrology etc in an industry visit report.

Course code :  402052                                                   Subject: ELE IV Solar & Wind Energy

CO No.

Course Outcome

402052.1

Analyze the basic principle and mechanism of surface degradation like corrosion triangle in protected or unprotected atmosphere to curtail corrosion formulation

402052.2

Select correct corrosion prevention techniques, in accordance with ASTM standards for a different service conditions including metallurgical and environmental aspects, for improvement in design to control corrosions.

302052.3

Relate the role of surface treatment methods like diffusion and heat treatment as per ASTM standards like G105 for selection of steels and their applications in sectors like Mining, Constructions, Transportation, Fabrication.

402052.4

Select the suitable surface treatments like ion beam, gel and dielectric coating, to improve the surface properties thereby increasing the corrosion resistance in form of powder or suspension.

402052.5

Evaluate different surface coating techniques like cladding, hot dipping, vapor deposition to increase sustainability in high temperature operations to make the surface feasible in high altitude applications like aerospace and relevant domains.

402052.6

Judge surface characterizations like coating thickness, defects and remedies for improvement in topography to reduce surface roughness and improvement in surface performance.

Course code :  402041                                 Subject: Hydraulics and Pneumatics

CO No.

Course Outcome

402041.1

 To describe the fundamental concepts and governing laws of Hydraulics & Pneumatic systems (B2)

402041.2

To understand operating principle of different components used in hydraulic and pneumatic systems. (B3)

402041.3

 To select various components for hydraulic and pneumatic systems. (B5)

402041.4

To use hydraulic and pneumatic circuits in various Industrial applications. (B3)

402041.5

To understand low cost automation by using pneumatic systems.(B3)

402041.6

To design and formulate any hydraulic and pneumatic circuits. (B6)

Course code :  402042                                     Subject: CAD CAM Automation

CO No.

Course Outcome

402042.1

Analyze and design real world components

402042.2

Suggest whether the given solid is safe for the load applied.

402042.3

Select suitable manufacturing method for complex components

402042.4

To develop different types of surfaces with the help of different  curves

402042.5

Implement proper Rapid prototyping method for particular component

402042.6

Select the proper automation and robotic structure for particular system

Course code :  402043                                          Subject: Dynamics of Machinery

CO No.

Course Outcome

402043.1

Students will be able to determine the unbalance in rotating & reciprocating machines and to determine the correction required.

402043.2

Student Should be able to understand the concept of Single DOF free and force vibrations  to various system

402043.3

Students will be able to understand the 2 and Multidegree of freedom System for Damped and Undammed Vibration for various systems.

402043.4

Students will be able to model and analyze simple, two degrees of freedom vibration systems.

402043.5

Students will be able to measure the vibration and methods to controls the vibrations.

402043.6

Students will be able to carry out noise analysis and Methods to control unwanted sound of machine and its component.

Course code :  402044A                                         Subject: Finite Element Analysis

CO No.

Course Outcome

402044A.1

To explain the fundamentals of FEA pertaining to structural and heat transfer domain. (B2)

402044A.2

To formulate and solve 1D element structural problems involving bars, beams, trusses, frame problems. (B6)

402044A.3

To construct and solve 2D element problems involving triangular & quadrilateral elements. (B6)

402044A.4

To construct and solve 2D element problems involving axi-symmetric, iso-parametric & higher order elements. (B6)

402044A.5

To formulate and solve 1D element steady state heat transfer problems. (B6)

402044A.6

To evaluate appropriate FEA technique to solve dynamic vibrational problems.(B5)

Course code :  402045A                                         Subject: Automobile Engineering

CO No.

Course Outcome

402045A.1

Student will be able to interpret various types of vehicle layouts and specifications of Automobiles with its importance

402045A.2

Student will be able to select various drive trains and transmission systems to improve vehicle performance

402045A.3

Student will be able to distinguish axles, steering systems and tyre and wheel assembly

402045A.4

Student will be able to apply the knowledge of various types of suspension and brake systems

402045A.5

Student will be able to examine performance and safety systems with modern technologies of Automobiles

402045A.6

Student will be able to interpret the problems of automobiles with the knowledge of electrical systems and batteries in vehicle maintenance

Course code :  402046                                                     Subject: Project Stage-I

CO No.

Course Outcome

402046.1

Implement suitable methodology to solve the Problems pertaining to the mechanical engineering by utilizing the knowledge gained during the curriculum.

402046.2

Create the sustainable, economic and environmental friendly solution to the considered problem and analyze the same by effective utilization of relevant tools and techniques. 

402046.3

Develop managerial skills and work as a team for obtaining the solution of mechanical or interdisciplinary engineering related problems within stipulated time, following morality and ethics.

Sr. No.

Type of Innovative Teaching Methods

Description

Remarks of Comments etc.

1

Google Classroom

Faculty Members delivers important Concepts using this mode also

Source: Google Inc.

2

MOODLE

Assignments & information is available to students on MOODLE for use

3

NPTEL Videos

Effective Teaching is carried out with help of NPTEL Videos also.

Source : IITs

4

Spoken Tutorials

Students are made available with Spoken Tutorials Lectures

5

Group Discussion/Pair-Think-Share

In classroom Group Discussion is carried out for effective learning

6

Industrial Visits/seminars/Workshop   

Industrial Visits, Seminars, Expert Lecture & Workshop are conducted in order to help students to learn beyond syllabus

7

Online Youtube Videos by Faculty

Faculty Members Upload their Teaching Videos

Source: Youtube

8

My Examo

Faculty Members conduct Practice Test for Students

9

Websites/Blogs

Faculty members also have their own website / Blogs for sharing Knowledge with student.

10

ICT / PPTs   

Use of ICT is employed by faculty members.

11

COLLPOLL

Use of COLLPOLL by teachers as well as students for assignment, attendance, unit tests etc.

12

Virtual Labs

Use of Virtual Lab from IITs is  employed by faculty