Achievements
- Dr.N.K.Kamble Selected as BOS member in Production and Industrial Engineering board of SPPU on 5th January 2019
- Dr. V A Kulkarni is appointed as BOS Production Academic Council.
- Dr.V.A.Kulkarni Completed Consultancy project on "Identification of best CMM job position through in-line gauges" for Microstar gauging and Technologies, S. No 15/2 Gondhalenagar, Hadapsar, Pune 411028.
- Dr.V A Kulkarni filed a patent on CMM Interim Check by using Zirconia CFRP ball plate Artifact and published on 6/11/2018
- Dr.V A Kulkarni completed Consultancy project on "CFRP Zirconia CMM ball plate Artifact" for Samruddhi Engineering, Plot No. 71/1, Shop No. 16, Pesh Industrial Estate Premises, Co-op Society Ltd. S. Block, Pune- 411026.
- Dr.N.K.Kamble Completed Ph.D. from Pune University 4 July 2018.
- Dr.G. K. Jadhav Appointed on Editorial Board Of Science PG Journal.
1. V.A. Kulkarni completed research grant utilization of Rs. 1,60,000/- from Board of College and University Development for research project entitled “Development of Supervisory Control and Data Acquisition System for Real-Time Error Analysis in Measurement System by Touch Trigger Probe Type Coordinate Measuring Machine” from Savitribai Phule Pune University in Dec 2016
2. S. Sarnobat completed research grant utilization of Rs. 1,40,000/- from Board of College and University Development for research project entitled “Experimental Investigation and Analysis of Hardened Steel” from Savitribai Phule Pune University in Dec 2016
3. N. M. Mahajan Presented paper in National Conference on Technical Revolution, NCTR, 2016 at Anantrao Pawar College of Engineering and Research, Pune on “Taguchi Analysis of Micromachining of Ceramic Material by powder mix electrochemical discharge machining process” on March 10-11, 2016
4. R. P. Jahav and M. N. Mathapati presented a paper in International Conference on “Emerging Research Trends in Applied Engineering and Technology” at Kokan Gyanpeeth Engineering College Karjat, entitled “Optimization of Saddle Supports in Horizontal Pressure Vessels” on April 01-02, 2016.
5. M. N. Mathapati (DYPCOE), Shailesh Jatale, and Aman Batra (Atlas Copco) presented paper in International Conference on “Lean Manufacturing in Industry for increasing productivity by reducing waste” at Kokan Gyanpeeth Engineering College Karjat, in the conference on “Emerging Research Trends in Applied Engineering and Technology” on April 01-02, 2016.
6. M. N. Mathapati and R. P. Jadhav Presented paper in National Conference on “Research, Design, and Development in Engineering, Management and Science” at Rajgad Gyanpeeth on “Abrasive Wear Behaviour of Banana/Glass Fibre reinforced hybrid polymer composite on March 19-20, 2016.
7. V. P. Parsekar and N. K. Gaudgaon attended state level seminar on “Embedded System and Robotics” in D Y Patil College of Engineering, Akurdi, Pune on February 18, 2016.
8. J. M. Khade was invited for the guest lecture in “JSPM Narhe” for topic “Advancement of Material Science” on September 08, 2015.
9. D. S. Mane attended seminar on “Zero Defect-Quality improvements in Industries” at AISSMS, COE, Pune on March 3-4, 2016
10. J. M. Khade attended workshop on “Recent Trends in Material Science in Engineering and Technology” at Govt. College of Engineering, Karad on May 11-15, 2015
11. P R Padave presented paper in “PANSOPHY-National Level conference on Advances in Mechanical Engineering” on “Improvement of Surface Roughness in Eco-Friendly Grinding process by using Air as Coolant Medium” at D Y Patil College of Engineering, Ambi on February 19-20, 2016
12. P R Padave presented paper in “PANSOPHY-National Level conference on Advances in Mechanical Engineering” on “Experimental Analysis of Process parameters in AJM Process on OHNS ” D Y Patil College of Engineering, Ambi on February 19-20, 2016
Year 2014-15
- Mr. J.M. Khade has published a paper on ‘Electro-Deposition of M-Amino Phenol on Low Carbon Steel and Corrosion Protection Studies’ in U.P.B. Scientific Bulletin, series b, Vol. 76, Issue 4, 2014. ISSN 1454-2331.
- Mr. A.H.Gaikwad has participated and presented a paper in All India Seminar on “Opportunities & Challenges in Product Life Cycle Management” held at The Institution of Engineers (India), Pune Local Centre in association with Department of Production & Industrial Management, College of Engineering Pune. (30th – 31st August 2014)
- Mr. M.N.Mathapati Participated in a Short-term course on Inventory Control Methods organized by National Institute of Technical Teachers Training and Research, Bhopal from 16/06/2014 to 20/06/2014
- Mr. R.P.Jadhav Participated in a Short-term course on Industrial Automation and Robotics organized by National Institute of Technical Teachers Training and Research, Bhopal from 27/10/2014 to 31/10/2014
- Mr.M.N.Mathapati and Mr.J.C.Remani attended two days national level workshop on “Product Design and Development” organized by Mechanical Engineering department MMIT, Lohagaon from 23rd and 24th December 2014.
Publications
|
Sr.No. |
Name of Faculty |
National Conference |
International Conference |
National Journal |
International Journal |
Total |
|
1 |
Dr.V.A.Kulkarni |
0 |
4 |
0 |
6 |
10 |
|
2 |
Dr.G.K.Jadhav |
0 |
0 |
0 |
7 |
07 |
|
3 |
N.K.Kamble |
0 |
3 |
1 |
5 |
09 |
|
4 |
S.S.Sarnobat |
0 |
0 |
1 |
2 |
03 |
|
5 |
Y.G.Kamble |
0 |
0 |
0 |
2 |
02 |
|
6 |
R.P.Jadhav |
1 |
2 |
0 |
0 |
03 |
|
7 |
M.N.Mathapati |
1 |
3 |
0 |
0 |
04 |
|
8 |
P.R.Padave |
3 |
1 |
0 |
1 |
05 |
|
9 |
J.M.Khade |
0 |
1 |
0 |
1 |
02 |
|
10 |
N.M.Mahajan |
1 |
2 |
0 |
0 |
03 |
|
11 |
S.V.Bhosale |
0 |
0 |
0 |
1 |
01 |
|
12 |
V.P.Parsekar |
0 |
0 |
0 |
1 |
01 |
Book Publications
updating soon ...
Research Grants
updating soon ...
Consultancy
updating soon ...
IPR
updating soon ...
Awards & accolade
updating soon ...