Banner

CHECK DOWNLOADS SECTION

Apply now for full-time freshman, transfer admission, or graduate programs.

Menu

Saturday, 26 September 2020 04:59

Find a complete guide for Bachelor of Engineering (BE) admissions 2020 in Maharashtra such as admission process, entrance exam, eligibility criteria, required documents, reservation policy, fees structure, etc.

DYPCOE : A Complete Guide for B.E. Admissions 2020 in Maharashtra

The educational sector has faced tremendous impact due to the COVID-19 pandemic. The traditional methods of education have been replaced by online education. Students around the world are confined in their own houses owing to the pandemic. It has even deterred the admission processes of several courses and the commencement of the next academic year. In such a situation, there’s growing confusion among students regarding the admission processes for the AY 2020. Especially in the technical fields like Engineering.

In India, Engineering is one of the most popular options among students. And each year witnesses a tremendous increase in the number of engineering students. This year there has been a delay along with some major changes in the admission process. Read on the blog to get a detailed understanding of the B.E. admissions for AY 2020 in Maharashtra!

 

Engineering Admission Process: An Overview

In Maharashtra, Directorate of Technical Education (DTE) is responsible for the admissions to the graduation and the postgraduation Engineering courses. The state boasts of a large number of engineering colleges in the country. The admissions happen through the State Common Entrance Test Cell which lies under the realm of the DTE. Let’s take a look at the admission process, eligibility criteria, required documents, reservation criteria, fee structure, etc.

Engineering Admission Process 2020 in Maharashtra

The AY 2020 admission process for Engineering in Maharashtra has been delayed till October owing to the COVID-19 pandemic. Previously, the entrance exams were postponed as well, resulting in the delayed admission process. Thus, students need to wait patiently to appear for these entrance exams and then continue with their admission process. 

The MHT CET 2020 exam has been postponed and the DTE is yet to announce the official exam dates and any further information regarding the admission process. The postponed MHT CET exam has led to a delay in the commencement of the online registrations for the Centralised Admission Process (CAP), payment of registration fee, releasing registered candidates’ list, document verification, and publication of provisional merit list.

The B.E. Maharashtra admission procedure takes place in various stages. All the eligible students who have registered for Common Admission Process or CAP have to go through these stages. The first stage is preparing the merit list of candidates from different categories. This involves assigning merit numbers to the registered candidates based on their score in MHT CET or JEE Main. Post the displaying of merit list comes the next stage of the Centralized Counselling Process. All the candidates who have appeared in the merit list are eligible for the Centralized Counselling Process and seat allotment. It involves the following stages: -

  • Maharashtra CAP Online Application Form submission
  • Document Verification at Facilitation Centres
  • Display of Provisional and Final Merit Lists

Engineering Entrance Exam Details

Engineering colleges in India have their specific criteria regarding Entrance exams for B. E. admissions. Some colleges have their own entrance exams while others consider the scores in the entrance exams conducted by DTE. Two of the most common entrance exams that are accepted by the engineering colleges in Maharashtra are-

Various colleges in Maharashtra select students based on their scores in MHT CET or JEE Main score. Hence, by clearing these exams and based on the requirement of your preferred college, you are eligible to register for B.E. admissions 2020 in Maharashtra.

 

Eligibility Criteria for B. E. Admissions 2020 in Maharashtra

Students from all over India can apply to the B.E. programs offered by various colleges in Maharashtra. But there are different eligibility criteria for students based on their domicile. Let’s take a look at these eligibility criteria-

Eligibility Criteria for Maharashtra State Candidates/ Jammu & Kashmir Migrant Candidates/ All India Candidates (AI)

  1. The aspirant should be an Indian National
  2. Should have passed HSC or its equivalent examination with Physics and Mathematics as compulsory subjects along with one of the Chemistry or Biotechnology or Biology or Technical Vocational subjects.
  3. Should have obtained at least 50% marks (at least 45% marks, in case of Backward class categories and Persons with Disability candidates belonging to Maharashtra State only) in the above subjects taken together.
  4. Furthermore, the candidate should have appeared in all the subjects in CET and should obtain non zero scores in CET conducted by the Competent Authority.
  5. Students whose parents are domiciled in Maharashtra are also eligible for admission by providing their domicile certificate during the admission procedure.
  6. Students with Diploma in Engineering and Technology need to pass the exam with at least 50% marks (at least 45 % marks, in case of Backward class categories and Persons with Disability candidates belonging to Maharashtra State only) to take admission through B.E. lateral entry. 
  7. Obtained non-zero score in MHT CET 2020 OR JEE(Main).

 

Documents Required for Bachelor of Engineering Admission in Maharashtra

For seeking B.E. admissions in Maharashtra, students need to have the following documents ready: -

  • Transfer Certificate (TC)or School Leaving Certificate
  • HSC Mark Sheet or Pass Certificate
  • SSC Mark Sheet or Pass Certificate
  • MHT CET or JEE Main Score Card/ Rank Card
  • Domicile Certificate (if applicable)
  • Category Certificate (if applicable)
  • Physical Disability Certificate (Only for PH Category)
  • Income Certificate (Only for students who wish to avail the Tuition Fee Waiver Scheme) 

Keeping all these documents handy, both the originals and xerox copies can avoid the last-moment confusion.

 

BE Admission Reservation Policy

66% of seats for B.E. programs in Maharashtra are reserved for Backward or reserved categories. Some seats are also reserved for persons with Disability Candidates, sons/daughters of Defence service personnel, EWS candidates, orphan candidates, and female students. The remaining seats are available for open or general category students. Following is the detailed distribution of seats based on these categories.

Total 66% of seats are reserved and here is the distribution-

  • Scheduled Castes and Schedule caste converts to Buddhism (SC) - 13.0%
  • Schedule Tribes (ST)- 7.0%
  • Vimukta Jati (VJ)/De notified Tribes (DT) (NTA)- 3.0%
  • Nomadic Tribes 1 (NTB)- 2.5 %
  • Nomadic Tribes 2 (NTC)- 3.5%
  • Nomadic Tribes 3 (NTD)- 2.0%
  • Other Backward Classes (OBC)- 19.0%
  • Socially and Educationally Backward Classes (SEBC)- 16.0%

Other reservation criteria percentage-

  • Sons/daughters of Defence service personnel- 5% seats
  • Persons with Disability Candidates- 5% seats
  • Reservation for EWS (Economically Weaker Section) Candidate- 10% seats
  • Reservations for Orphan Candidates - 1% seats
  • Female candidates- 30% seats

What is Selection Process for Bachelor of Engineering (BE)

The selection process for B.E. 2020 admissions in Maharashtra includes the following stages-

  • Filling and confirmation of Online Option Form
  • Display of Provisional merit list and final allotment
  • CAP Round I, Round II and Round III
  • Accepting or rejecting the allotment
  • Completing the admission process at the Institution
  • Paying fees and confirming the admission

 

D.Y. Patil College of Engineering, Akurdi

Dr. D. Y. Patil Prathishthan's, D.Y. Patil College of Engineering, Akurdi, (DYPCOE) offers full-time B.E. and M.E. programs in various Engineering branches. These programs are approved by AICTE, New Delhi, and are affiliated to Savitribai Phule Pune University. The college believes in providing the best learning experience to students with robust industrial exposure, excellent placement facilities, advanced laboratories, digital libraries, classrooms equipped with modern facilities, and much more. With a distinguished faculty and a dual approach of theoretical knowledge and practical training, these programs create adept Engineers of tomorrow. The College also offers an innovative pedagogy and regular guest lectures and seminars, conducted by Industry experts. It has MoUs with various industries that help in enhancing the quality of education. These features make D.Y. Patil College of Engineering, Akurdi, the best place to kickstart your Engineering career.

 

Fees Structure

Several factors impact the fee structure for the B.E. programs offered by institutes across India. These include infrastructural, educational, and institutional facilities. Another major reason for the discrepancy in fees is the availability of financial aid from the State or the Central Government. D.Y. Patil College of Engineering, Akurdi, Pune offers undergraduate and postgraduate Engineering degree programs. There are various Engineering branches along with world-class facilities and numerous career opportunities.

The fee structure (in INR) for First Year Engineering (all branches) is as follows: -

Particulars

Open category

OBC/EBC

category

SC/ST

Category

VJ/NT/SBC TFWS

candidates

J& K Candidates

For Maharashtra board

Other than Maharashtra board

Total Fee

123292

123792

70053

3292

16815

27792

 

For additional information visit- https://www.dypcoeakurdi.ac.in/

Advance your B.E. admissions for the AY 2020 by carefully following the above steps. Though the pandemic might have delayed the admission process, it can’t keep you away from establishing a successful career. So, if you wish to kick start your engineering career from one of the premium institutes in Maharashtra, register in D.Y. Patil College of Engineering, Akurdi. know more about the institution, along with the programs offered, the admission process, fee structure, program outcomes, etc. You can also fill up a form there to get all the additional details. So, what are you waiting for? Register now!

 

Copyright © 2015  Dr. D.Y. Patil Educational Complex, Akurdi, Pune
Best viewed in IE 10+, Firefox 20+, Chrome , Safari5+, Opera12+