DR. P.T.Nitnaware published the chapter entitled ‘Study of Research Methodologies and its Different Scales with Overview on Advances in Teaching Learning”, on ISBN – 978-93-5777-343-0 on January 26, 2023.
|
Sr.No |
Name of Author |
Academic Year |
|
1. |
Sonawane, P. R., Bhanagle, J. H., Thakur, S. V., Koli, B. R., Dole, N. B., Kolambe, C., & Barjibhe, R. B. (2022). Analysis of cutting fluid on minimum quantity lubrication by using vegetable oil. In Materials Today: Proceedings (Vol. 68, pp. 2435–2442). Elsevier BV. https://doi.org/10.1016/j.matpr.2022.09.144 |
2022-23 |
|
2. |
Thakur, S., & Barjibhe, R.(2022) Excessive scum generation consequences on performance of biogas power plant under unregulated alkanity. Agribiop.com. Retrieved January 7, 2025, from https://agribiop.com/wp-content/uploads/2019/11/AOABR-27-1-92-96.pdf |
2022-23 |
|
3. |
Zope, B., Dey, T., Jatti, V. S., & Sarnobat, S. S. (2022). Aluminum alloy and galvanized steel CMT weld joints for lightweight automobile applications. In Engineering Research Express (Vol. 4, Issue 3, p. 035001). IOP Publishing. https://doi.org/10.1088/2631-8695/ac7125 |
2022-23 |
|
4. |
Ramdas, D., & Dey, T. (2022). Use of electronic viscous drive to optimize fan duty cycle. In Engineering Research Express (Vol. 4, Issue 1, p. 015018). IOP Publishing. https://doi.org/10.1088/2631-8695/ac5125 |
2022-23 |
|
5. |
Khedkar, Y., Nagpure, H., Dendage, P., Shinde, P., Naikavade, S., & Dey, T. (2022). The evaluation of forces acting on excavator bucket and its capacity. In Materials Today: Proceedings (Vol. 68, pp. 2591–2596). Elsevier BV. https://doi.org/10.1016/j.matpr.2022.10.013 |
2022-23 |
|
6. |
Khare, A., Bewoor, A., & Kulkarni, V. (2022). A New Approach to Artefact Material Selection for Interim Checks of CMMs that uses MADM Tools. In MAPAN (Vol. 38, Issue 1, pp. 193–202). Springer Science and Business Media LLC. https://doi.org/10.1007/s12647-022-00603-z |
2022-23 |
|
7. |
Kulkarni, V. A., Dhanvijay, M. R., Bewoor, A., & Malathi, P. (2022). Effectiveness of CO-PSO Formulation and Attainment with T-shape Engineer for Aligning Students Learning Outcomes with Alumni Profiles. In Journal of Engineering Education Transformations (Vol. 35, Issue S1, pp. 153–159). Rajarambapu Institute of Technology. https://doi.org/10.16920/jeet/2022/v35is1/22022 |
2022-23 |
|
8. |
Lalit N. Patil, Hrishikesh P. Khairnar, J. A. Hole, D. M. Mate, A.V. Dube, R. N. Panchal, & V. B. Hiwase. (2022). An Experimental Investigation of Wear Particles Emission and Noise Level from Smart Braking System. In Evergreen (Vol. 9, Issue 3, pp. 711–720). Kyushu University. https://doi.org/10.5109/4843103 |
2022-23 |
|
9. |
Mr.Arun Kumar Battu, Vikas Pawar, Aftab Shaikh, Harshad Walekar, Sandesh Kale(2022) Dynamic Balancing Of Heaviley Loaded Trolly, , Journal For Basic Sciences, Volume 22, Issue 11, 2022 DOI:10.37896/JBSV22.11/1539 |
2022-23 |
|
10. |
Dhanvijay, M., Kulkarni, V., Patil, N., & Bewoor, A. (2023). Development of PLC-based system for lift gate slam platform. In AIP Conference Proceedings (Vol. 2804, p. 020231). The Fourth Scientific Conference For Electrical Engineering Techniques Research (Eetr2022). AIP Publishing. https://doi.org/10.1063/5.0163916 |
2023-24 |
|
11. |
Bewoor, A. K., Patil, N., Kaliappan, S., Patil, P. P., Raju, R., Ramanathan, P., & Kulkarni, V. A. (2023). Sustainability assessment of tungsten inert gas welding process using grey relational analysis. In AIP Conference Proceedings (Vol. 2804, p. 020232). THE FOURTH SCIENTIFIC CONFERENCE FOR ELECTRICAL ENGINEERING TECHNIQUES RESEARCH (EETR2022). AIP Publishing. https://doi.org/10.1063/5.0163918 |
2023-24 |
|
12. |
Hait, M., Dey, T., & Sarnobat, S. S. (2023). Design and analysis of newly developed two-wheeler shock absorber helical spring. In Journal of Physics: Conference Series (Vol. 2601, Issue 1, p. 012025). IOP Publishing. https://doi.org/10.1088/1742-6596/2601/1/012025 |
2023-24 |
|
13. |
Thakur, S. V., Dumane, Y. A., Londhe, O. R., Chumble, V. D., Patil, S. S., Chiplunkar, A. A., & Sonawane, P. R. (2023). Effective energy saving techniques for the system of pneumatic gauges. In Materials Today: Proceedings (Vol. 72, pp. 1153–1157). Elsevier BV. https://doi.org/10.1016/j.matpr.2022.09.188 |
2023-24 |
|
14. |
Mrs. S.K.Dhamale, Mrs.M.P.Ugale,(2023), A review on “Weight Reduction of Steering Knuckle of Vehicle, Journal For Basic Sciences, Volume 23, Issue 12, DOI:10.37896/JBSV23.12/2782 |
2023-24 |
|
15. |
Mrs. Monica J. Indhe (Ugale) , Mrs. Swati K. Dhamale,(2023), Overall Heat Transfer Coefficient optimization in Double Pipe Heat Exchanger, Journal For Basic Sciences Volume 23, Issue 12 DOI:10.37896/JBSV23.12/2790 |
2023-24 |
|
16. |
Kamepalli, K., Hiwase, V. B., Waghulde, K. B., & Patil, L. N. (2023). Detection of press section felt roll instabilities by analyzing pressure variation and vibration measurements. In Multiscale and Multidisciplinary Modeling, Experiments and Design (Vol. 7, Issue 3, pp. 1591–1603). Springer Science and Business Media LLC. https://doi.org/10.1007/s41939-023-00212-6 |
2023-24 |
|
17. |
Kumar, S., Maurya, M., Sharma, T., Kumar, A., Jambhale, S., Shankar, R., Mishra, D., & Nitu. (2023). Optimization and ANFIS-based modeling of two step FSSW process parameters on tensile strength for triple-sheet joining of aluminum alloy. In Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (Vol. 238, Issue 7, pp. 2815–2830). SAGE Publications. https://doi.org/10.1177/09544062231202143 |
2023-24 |
|
18. |
Biswas, S., Sengupta, A., Kakati, D., Chakraborti, P., & Banerjee, R. (2023). Parametric optimization of the CNG/ethanol-induced RCCI profiles in biodiesel combustion through a robust design space foray. In Fuel (Vol. 332, p. 126203). Elsevier BV. https://doi.org/10.1016/j.fuel.2022.126203 |
2023-24 |
|
19. |
Patil, A. R., Kakati, D., Singh, B., Rosen, M. A., Patil, R., Javanjal, V., Sonawane, C., Panchal, H., Kumar, A., Haque Siddiqui, M. I., & Sadasivuni, K. K. (2024). Experimental investigation of multi-additive fuel blend and its optimization for CI engine performance and emissions by the hybrid Taguchi- TOPSIS technique. In Case Studies in Thermal Engineering (Vol. 53, p. 103703). Elsevier BV. https://doi.org/10.1016/j.csite.2023.103703 |
2024-25 |
|
20. |
Kakati, D., Patil, A. R., Ambhore, N., Sharma, K., Rosen, M. A., Dobrotă, D., Chandrakant, S., Panchal, H., Haque Siddiqui, M. I., & Banerjee, R. (2024). Investigating the influence of varying split injection profiles on stability of diesel engine operated under partially premixed mode with methanol. In Alexandria Engineering Journal (Vol. 88, pp. 216–229). Elsevier BV. https://doi.org/10.1016/j.aej.2024.01.001 |
2024-25 |
|
21. |
Mrs.S.K.Dhamale , Mrs. Monica Ugale, Dr.T.Dey, (2024), Design and Development of Permanent Magnet Clutch using Differential Mechanism , Journal For Basic Sciences ,Volume 24, Issue 12 DOI:10.37896/JBSV24.12/3469 |
2024-25 |
|
22. |
Monica J. Indhe , Swati K. Dhamale,(2024), Analytical And Experimental Investigation Of Double Pipe Heat Exchanger For Optimization Of Longitudinal Fin Profile, Journal For Basic Sciences Volume 24, Issue 12 DOI:10.37896/JBSV24.12/3459 |
2024-25 |
|
23. |
Sandip Nehe, Vinayak B (2024). Determination of Uncertainty in calibration of External Micrometer. In Advances in Nonlinear Variational Inequalities (Vol. 27, Issue 3, pp. 280–289). Science Research Society. |
2024-25 |
|
24. |
Sarnobat, S., Kumar, I., Saxena, K. K., & Malik, V. (2024). Investigation on the mechanical properties and microstructural analysis of dissimilar friction stir welding of AA5154/AA7150. In Journal of Adhesion Science and Technology (Vol. 38, Issue 21, pp. 4010–4036). Informa UK Limited. https://doi.org/10.1080/01694243.2024.2362029 |
2024-25 |
|
25. |
Pathak, S. S., Mane, S. J., Vesmawala, G. R., & Sarnobat, S. S. (2024). Prediction of compressive strength of concrete using multilayer perception network, generalized feedforward network, principal component analysis network, time lagged recurrent network, recurrent network. In Asian Journal of Civil Engineering (Vol. 26, Issue 1, pp. 431–450). Springer Science and Business Media LLC. https://doi.org/10.1007/s42107-024-01175-w |
2024-25 |
|
26. |
Pathak, S. S., Vesmawala, G. R., Mane, S. J., & Sarnobat, S. S. (2024). Effectiveness of artificial neural network for forecasting of fracture toughness of concrete specimens. In Asian Journal of Civil Engineering (Vol. 25, Issue 6, pp. 4697–4712). Springer Science and Business Media LLC. https://doi.org/10.1007/s42107-024-01074-0 |
2024-25 |
|
27. |
Srinidhi, C., Channapattana, S. V., Aithal, K., Panchal, R., Dhaneshwar, S., Karle, A., Dharmadikari, A., Gajbhiye, A., & Sarnobat, S. (2024). Thermodynamic and exhaust emission studies of CI engine powered by neem oil methyl ester blends doped with nickel oxide nano additives. In Environmental Progress & Sustainable Energy (Vol. 43, Issue 5). Wiley. https://doi.org/10.1002/ep.14437 |
2024-25 |
|
28. |
Bose, M., & Dey, T. (2024). Growth kinetics of lead resistant Bacillus infantis isolated from battery industry waste. In Journal of Environmental Engineering and Science (Vol. 19, Issue 3, pp. 132–139). Emerald. https://doi.org/10.1680/jenes.23.00035 |
2024-25 |
|
29. |
Nitnaware, P., Meshram, V., Nanwatkar, R., & R. Patil, A. (2025). Investigation of sequential port fuel injection over manifold fuel injection to evaluate combustion and emission parameters in spark ignition engine using hydrogen enriched CNG blends. International Journal of Mechanical Engineering, 12(2), 88–106. doi:10.14445/23488360/ijme-v12i2p108 |
2024-25 |
|
30. |
Nanwatkar, R., Watvisave, D., Bagde, A., & Nitnaware, P. (2025). Investigations of lithium-ion battery and supercapacitor hybridization on relative effectiveness and energy performance of E-bicycle with regenerative braking. International Journal of Mechanical Engineering, 12(2), 23–38. doi:10.14445/23488360/ijme-v12i2p103 |
2024-25 |
|
31. |
Panchal, G. T., Nitnaware, P. T., Nanwatkar, R. K., & Bansod, P. J. (2025). Comparative analysis of numerical and CFD approaches for cooling performance evaluation in tube and plate heat exchangers. International Journal of Mechanical Engineering, 12(3), 93–108. doi:10.14445/23488360/ijme-v12i3p108 |
2024-25 |
|
32. |
Thakur, S., Amrutsagar, L. R., Patil, A., Kulkarni, V., S B, P., Malathi, P., & Nitnaware, P. T. (2025). Assessment of Internship Competencies and Learning Outcomes Based on AICTE’s Examination Reforms Policy 2018 for Sustainable learning : A Case Study. Journal of Engineering Education Transformations, 38(2), 303–313. https://doi.org/10.16920/jeet/2025/v38is2/25036 |
2024-25 |
|
33. |
Panditrao, A., Upadhye, V., & Kulkarni, V. (2025). Sustainable Experiential Learning: An Effective Tool for Enhancing Student’s Competency and Employability. Journal of Engineering Education Transformations, 38(2), 389–397. https://doi.org/10.16920/jeet/2025/v38is2/25047 |
2024-25 |
|
34. |
Kulkarni, V., Wakode, J., Patil, A., N, M., Deshmukh, R., & Malathi, P. (2025). Sustainability Analysis of Social Interactions Achieved by Collaborative learning Resulted from NPTEL SWAYAM Mentor Scheme. Journal of Engineering Education Transformations, 38(2), 285–290. https://doi.org/10.16920/jeet/2025/v38is2/25034 |
2024-25 |
|
35. |
Deshmukh, S. P. S., Kulkarni, V., & Malathi, P. (2025). Leveraging Interactive Learning by Integrated Assessment Software in EdTech: Enhancing Sustained Learning Outcomes with Mentimeter. Journal of Engineering Education Transformations, 38(2), 14–22. https://doi.org/10.16920/jeet/2025/v38is2/25003 |
2024-25 |
|
36. |
Kulkarni, V.A., Patil, A.R. Customized Measurable Availability Framework of Sewage Treatment Plant Through Risk Priority Number. MAPAN 40, 77–88 (2025). https://doi.org/10.1007/s12647-024-00787-6 |
2024-25 |
|
38. |
Amrutsagar, L. V., Kumar, R., Kanabar, B., Beemkumar, N., Sangwan, G., AlHazaa, A., … Bhowmik, A. (2025). Exploring methanol and CNG as low-reactivity fuels in reactivity controlled compression ignition for single-cylinder diesel engines: An experimental based comparative analysis at full load condition. Energy (Oxford, England), 332(135910), 135910. doi:10.1016/j.energy.2025.135910 |
2024-25 |
|
39. |
Sayli M Jadhav, V. A. Kulkarni, U. H. Dakave,(2025) Maintenance of FDM Printers :Issues and Challenges, Indian journal for Technical Education Vol. 48 Special Issue No. 1 April 2025 |
2024-25 |
|
40. |
Pradnesh R. Padave, Vinay Kulkarni,A Scientific Study of the Grinding Process Effects on Hard Materials, , Indian journal for Technical Education, Vol. 48 Special Issue No. 1 April 2025 |
2024-25 |
Mr. V.H. Hivase and R.H.Tike published a book on the subject “Renewable Energy Source” for Third Year-Bachelor of Technology, Dr. Babasaheb Ambedkar Technological University, on January 19, 2023.
Mr. V.H. Hivase and R.H.Tike published a book on the subject “Fundamental of Automobile Design” for Third Year-Bachelor of Technology, Dr. Babasaheb Ambedkar Technological University, on January 15, 2023
Dr. P. T. Nitnaware also conducted a boiler trial for 120 mechanical engineering students from Government College of Engineering, Awasari on April 16, 2026, for which 31,000 Rupees was sanctioned and received.
Ms. Swati S. Jadhav, Mr. A. B. Battu, Dr. T. Dey, and Mr. Vaibhav Phule attended a Faculty Development Program (FDP) on "Digital Pedagogy, Smart Classroom & AI Tools for Educators" held at D. Y. Patil College of Engineering, Akurdi, from April 6th to 10th, 2026.
Mr. G. M. Kulkarni organized a workshop titled "NBA Accreditation GAPC 4.0" at New Satara College of Engineering & Management, Pandharpur, on April 25, 2026, which was attended by 50 participants.
Mrs. Monica Jayaram Indhe, Mrs. S. K. Dhamale, and Mr. K. D. Mohare contributed their paper on longitudinal fin profile optimization to the 12th National Conference in 21 – 22 April 2026.
Mr. Vaibhav V. Phule, Dr. Sandeep Sarnobat, and Dr. T. Dey were awarded 3rd Prize for Best Paper Presentation for their research titled "Investigation of AWJM Process Parameters on MRR of SS 304 Using JASP-Based Statistical Analysis" at the ICRAES 2026 conference held on April 22-23, 2026.
On April 8, 2026, Mr. S. C. Wangadare from the Mechanical Department provided consultancy for a steam power plant to a student of Government College Awasari, receiving a sanctioned amount of 20,000 Rupees.
Mr. Arun Kumar Battu secured National NPTEL certifications from IIT Bombay, earning a Silver Medal (81%) in "Effective Engineering Teaching in Practice" and an Elite certificate (72%) in "Effective Writing.
Dr. T. Dey filed a national, non-commercial patent titled 'Propeller Shaft Emergency Braking System,' registered under number 202621043276.
Mrs. B.P. Bhor, Ms. Priyanka Gaikwad, Dr. T. Dey Mr. Ritesh Jagadale, Ms. Pratiksha Lonkar , Ms. Aditi Mohite Registered copyright on the topic “Design and analysis of energy absorbing Crashbox” on 24/04/2026 under application number AT-18972/2026-CO.
Ms. Priyanka Gaikwad, Mrs. Bhagyashri Bhor, Mr. Gaurav Panchal, Mr. Yogesh Maney Mr. Piyush Sahare Presented a research paper on “Optimized ATV Chasis Design for reduced Environmental impact using modern engineering approaches” at ICRAES 2026 held on 22nd and 23rd April 2026 at Bharati Vidyapeeth College of Engineering ,Lavale ,Pune and won the Second rank for best paper award.
Dr. P. T. Nitnaware published an investigation into sustainable CNC turning and hybrid optimization in the 2026 issue of Discover Mechanical Engineering.
Dr. Vinod B. Hiwase published a research article on the advanced applications of friction stir welding in joining difficult-to-weld metals in the Scopus Q2 journal Discover Materials on April 16, 2026.
